Download - SoftMaker

Since we only want to change the top line, all the other lines must be deselected.
To deselect the unwanted left, bottom and right lines, click on each of them
in turn. In the end, only the top line should remain selected, and little arrows
should appear only to the left and right of this line.
2. At present None is the selected Line style – and up until now, no line has been
drawn. Select Single for a single line.
3. The line width is normally set at 1 point. If you want a thicker or thinner line,
select the desired width from Thickness 1.
It’s as easy as that – first select the lines to be changed in the Sample field, then
specify whether you want a single or double line under Line style, and finally
change the Thickness.
To remove lines that have already been applied, invoke the command once more,
select the lines to be removed, and then click on the line style None.
Normal text paragraphs can be furnished with lines using the same method as for
footers.
Printing the practice letter
If you want, you can now print your first composition for proofing. To do this,
invoke the command File > Print or press the keyboard shortcut (Ctrl)(P).
The dialog box for File > Print
Manual TextMaker The TextMaker Tour 55