Download - SoftMaker

It should not surprise you that most of the options in the Format > Section dialog
have to do with text columns. “Sections” exist not merely to allow auto numbers to
be reset, but also to facilitate multi-column layouts.
Adding line numbers
Apart from the various kinds of numbering functions described in the preceding
sections, TextMaker provides a function that inserts line numbers alongside a
document’s text. The line numbers appear in the left margin, both on the display
and on the printed page.
To instruct TextMaker to show line numbers, proceed as follows:
1. Select as necessary the text segment for which line numbers are to be shown.
2. Invoke the Format > Section command.
3. Switch to the Line numbers property sheet.
4. Check the Show line numbers option.
5. As necessary, make the required settings for the numbering (see below).
6. Confirm with OK.
The line numbers are now displayed.
If you later want to turn the display of line numbers off, you can do so by following
the above described procedure, unchecking the Show line numbers option at
step 4.
Options
In the dialog box for this command, you can make settings that control the line
numbering as follows:
Show line numbers
Turns the display of line numbers on/off.
Options group box
Here you can set the following options:
184 Automatic numbering Manual TextMaker