Download - SoftMaker

Using the horizontal ruler
All the tab stops set for the current paragraph are shown in the horizontal ruler as
in the following example:
The horizontal ruler with some flush left tabs set at various positions
With the ruler, tab stops can be set, moved and deleted.
To set tab stops, proceed as follows:
1. Place the text cursor in the paragraph of interest (or select multiple paragraphs
to be modified).
2. To choose the desired tab type, click on one of the following icons in the
Formatting toolbar:
Flush left tab
Flush right tab (the text ends at the tab position)
Centered tab (the text is centered on the tab position)
Decimal tab (numbers are aligned on the decimal separator)
Alternatively, you can click the icon directly left of the ruler to change the tab
type. Each mouse click rotates through the available tab types.
3. Finally, simply click on the ruler on the desired positions to set the tab stops.
If the position of a tab stop does not suit you, you can move it very easily by
clicking on it with the mouse and, while holding the mouse button down, dragging
it to another position.
To clear a tab stop, drag it downward outside the ruler.
Bulleted lists
Lists in which each item is placed in its own paragraph and set off with a marker,
are much easier to read than comma separated lists. The markers used for such lists
(typically little boxes, circles, etc.) are called bullets.
Manual TextMaker Paragraph formatting 87