Download - SoftMaker

If you did not select complete rows or columns prior to invoking the Table >
Insert Cells command, a dialog appears that allows you to specify the way the
cells are to be inserted.
The dialog presents the following options:
Option
Entire rows
Entire columns
Single cells
Meaning
Complete rows of cells are inserted.
Complete columns of cells are inserted.
Cells are inserted on a cell by cell basis, depending on the
current selection. For example, if you selected 4x4 cells prior
to invoking the command, 4x4 cells are inserted.
An additional option allows you to specify the Number of cells to be inserted. If,
for example, you select Entire rows and then set the Number to 10, ten rows will
be inserted instead of only one.
Tip: Quick insertion of complete rows or columns
There is a shortcut for inserting new rows or columns:
Select either an entire row or an entire column of cells before invoking Table >
Insert Cells. TextMaker will then immediately insert a new row or column ahead
of the selected row or column – without first displaying the above described dialog.
Tip: If you select multiple rows or columns before invoking this command, the
corresponding number of rows/columns will be inserted. For example, if you
have selected 3 rows, 3 additional rows will be inserted instead of only one.
192 Tables Manual TextMaker