AT Command Reference Guide for EDGE Wireless ... - wless.ru
AT Command Reference Guide for EDGE Wireless ... - wless.ru
AT Command Reference Guide for EDGE Wireless ... - wless.ru
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 8 – Network Service <strong>Command</strong>s<br />
8.11 <strong>AT</strong>^SALS Alternate Line Service<br />
Description:<br />
Test <strong>Command</strong> Syntax: <strong>AT</strong>^SALS=<br />
Response:<br />
Read <strong>Command</strong> Syntax: <strong>AT</strong>^SALS<br />
Response:<br />
The <strong>AT</strong>^SALS command is designed to support Alternate Line Service. This allows the<br />
subscriber to use two voice numbers on the same SIM card (service requires a dual line<br />
SIM card).<br />
The write command enables or disables the presentation of and specifies the<br />
used <strong>for</strong> outgoing calls. The read command returns the presentation mode of<br />
and the currently selected .<br />
^SALS:(list of supported s), (list of supported s)<br />
OK<br />
^SALS: , <br />
OK<br />
ERROR<br />
Write <strong>Command</strong> Syntax: <strong>AT</strong>^SALS=[, ]<br />
Response:<br />
OK<br />
ERROR<br />
Parameter Descriptions:<br />
<br />
Controls the presentation mode of the URC “^SALS” which indicates the line number used by an incoming call:<br />
0 Disables indication of the called line. Default.<br />
1 Enables indication of the called line<br />
<br />
Selects the line to be used <strong>for</strong> outgoing calls.<br />
1 ALS Line 1. Default.<br />
2 ALS Line 2<br />
Unsolicited Result Code:<br />
If switched on with =1:<br />
^SALS: <br />
Indicates the line used by an incoming call. The setting is global <strong>for</strong> the ME; it is also non-volatile.<br />
Note:<br />
If a non ALS SIM is inserted, the will be reset to line 1 as well.<br />
Example:<br />
<strong>AT</strong>^SALS=1,1<br />
Line 1 has been selected <strong>for</strong> outgoing calls. “^SALS” URC is enabled.<br />
RING You receive a notification that you have an incoming call on line 2.<br />
^SALS: 2<br />
8.12 <strong>AT</strong>^SHOM Display Homezone<br />
Description:<br />
The <strong>AT</strong>^SHOM returns the homezone state. The result is valid only, if network registration<br />
state is 1 (registered) (see <strong>AT</strong>+CREG).<br />
The feature is available only <strong>for</strong> supported network operators (Viag, One2One, Orange<br />
and LCI) and requires a suitable SIM card. If the homezone feature is not supported by<br />
the network operator or SIM card, result is always 0.<br />
Test <strong>Command</strong> Syntax: <strong>AT</strong>^SHOM=<br />
Response:<br />
OK<br />
Exec <strong>Command</strong> Syntax: <strong>AT</strong>^SHOM<br />
Response:<br />
^SHOM: <br />
OK<br />
ERROR<br />
+CME ERROR: <br />
Parameter Description:<br />
<br />
0 ME is out of Homezone<br />
1 ME is within the Homezone<br />
Multi-Tech Systems, Inc. <strong>AT</strong> <strong>Command</strong>s <strong>for</strong> <strong>EDGE</strong> Modems (S000371B) 104