AT Command Reference Guide for EDGE Wireless ... - wless.ru
AT Command Reference Guide for EDGE Wireless ... - wless.ru
AT Command Reference Guide for EDGE Wireless ... - wless.ru
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 13 – Short Message Service (SMS) <strong>Command</strong>s<br />
13.6 <strong>AT</strong>+CMGR Read SMS Messages<br />
Description:<br />
The write command returns SMS message with location value from message<br />
storage to the TE. If status of the message is ‘received unread’, status in the<br />
storage changes to ‘received read’.<br />
Test <strong>Command</strong> Syntax: <strong>AT</strong>+CMGR=<br />
Response:<br />
OK<br />
Write <strong>Command</strong> Syntax: <strong>AT</strong>+CMGR=<br />
Response:<br />
Output if text mode (<strong>AT</strong>+CMGF=1) and command successful:<br />
For SMS-DELIVER<br />
+CMGR: , , [], [, , , , , , ,<br />
]<br />
<br />
[... ]<br />
OK<br />
For SMS-SUBMIT<br />
+CMGR: , , [][, , , , , [], , ,<br />
]<br />
<br />
[... ]<br />
OK<br />
For SMS-ST<strong>AT</strong>US-REPORT<br />
+CMGR: , , , [], [], , , <br />
<br />
[... ]<br />
OK<br />
For SMS-<strong>Command</strong>s<br />
+CMGR: , , [, , [], [], [], ]<br />
<br />
[... ]<br />
OK<br />
Output if PDU mode (<strong>AT</strong>+CMGF=0) and command successful:<br />
For SMS-SUBMITs and/or SMS-DELIVERs<br />
+CMGR: , [], <br />
<br />
[... ]<br />
OK<br />
ERROR<br />
+CMS ERROR<br />
Notes:<br />
• Response if <strong>AT</strong>+CMGR is used to read an empty record index: +CMGR: 0,,0.<br />
• Response if <strong>AT</strong>+CMGR is used to read a non-existent record index: +CMS ERROR: invalid memory index • The<br />
parameters and will only be displayed if parameter of the <strong>AT</strong>^SSCONF command is set to 1.<br />
• Users should be aware that when using this <strong>AT</strong> command quickly after SIM PIN authentication, the SIM data<br />
may not yet be accessible, resulting in a short delay be<strong>for</strong>e the requested <strong>AT</strong> command response is returned.<br />
See Section 20.1 Restricted Access to SIM Data after SIM PIN Authentication.<br />
Multi-Tech Systems, Inc. <strong>AT</strong> <strong>Command</strong>s <strong>for</strong> <strong>EDGE</strong> Modems (S000371B) 176