AT Command Reference Guide for EDGE Wireless ... - wless.ru

Chapter 13 – Short Message Service (SMS) Commands
13.22 AT^SLMS List SMS Memory Storage
Description:
AT^SLMS indicates the maximum capacity of each SMS storage type and the number of
locations currently used.
Test Command Syntax: AT^SLMS=
Response:
OK
Exec Command Syntax: AT^SLMS
Response:
^SLMS: “MT”,,
^SLMS: “SM”,,
^SLMS: “ME”,,
OK
ERROR
+CMS ERROR
Parameter Descriptions:
Maximum number of messages storable in the SMS memory of the SIM (physical storage “SM”).
Maximum number of messages storable in the SMS memory of the Mobile Equipment (physical storage “ME”).
Sum of “SM” and “ME”, indicated as “MT”. Maximum number of all messages storable in the SIM memory and
the Mobile Equipment memory.
Number of messages currently stored in the SMS memory of the SIM (physical storage “SM”).
Number of messages currently stored in the SMS memory of the Mobile Equipment (physical storage “ME”).
Concatenated logical SMS storages of SIM (“SM”) and Mobile Equipment (“ME”). Sum of all messages currently
stored, indicated as “MT”.
Note:
• Users should be aware that when using this AT command quickly after SIM PIN authentication, the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted Access to SIM Data after SIM PIN Authentication.
13.23 AT^SMGL List Short Messages from
Preferred Store without Setting Status to REC
READ
Description:
The execute command is the same as the write command, but uses the given default of
.
The write command allows to select a status type and lists, from the message storage
, all messages that currently have the specified . The major difference over
the standard command AT+CMGL is that the status of the listed messages remains
unchanged (unread remains unread).
Test Command Syntax: AT^SMGL=
Response:
same as AT+CMGL
Exec Command Syntax: AT^SMGL
Response:
^SMGL: (For default values of , see Section 13.1 “SMS Parameters”.)
OK
Write Command Syntax: AT^SMGL=
Response:
same as AT+CMGL
Notes:
• The selected can contain different types of SMs (e.g., SMS-DELIVERs, SMS-SUBMITs, SMS-
STATUS-REPORTs and SMS-COMMANDs). The response may be a mix of the responses of different SM
types. TE application can recognize the response format by examining the third response parameter.
• Users should be aware that when using this AT command quickly after SIM PIN authentication, the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted Access to SIM Data after SIM PIN Authentication.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 189