AT Command Reference Guide for EDGE Wireless ... - wless.ru

Chapter 2 – Configuration Commands
Read Command Syntax: AT^SCFG
Read Responses:
^SCFG: “GPRS/ATS0withAttach”,
^SCFG: “GPRS/AutoAttach”,
^SCFG: “GPRS/RingOnIncomingData”,
^SCFG: “MEopMode/Airplane”,
^SCFG: “MEopMode/Airplane/OnStart”
^SCFG: “PowerSaver/Mode9/Timeout”, (changed)
^SCFG: “Radio/Band”, ,
^SCFG: “Radio/OutputPowerReduction”,
^SCFG: “URC/CallStatus/CIEV”,
^SCFG: “URC/CallStatus/SLCC”,
^SCFG: “URC/Datamode/Ringline”,
^SCFG: “URC/Ringline”,
^SCFG: “URC/Ringline/ActiveTime”,
OK
Write Command for GPRS ATS0 with Automatic Attach: AT^SCFG=”GPRS/ATS0/withAttach”[, ]
Write Responses:
^SCFG: “GPRS/ATS0/withAttach”,
OK
ERROR
+CME ERROR
Write Command for GPRS Attach: AT^SCFG=”GPRS/AutoAttach”[, ]
Write Responses:
^SCFG: “GPRS/AutoAttach”,
OK
ERROR
+CME ERROR
Write Command for Ring on Incoming GPRS IP Data Packets:
AT^SCFG=”GPRS/RingOnIncomingData”[,]
Write Responses:
^SCFG: “GPRS/RingOnIncomingData”,
OK
ERROR
+CME ERROR
Write Command for Enable/Disable Airplane Mode During Operation
AT^SCFG="MEopMode/Airplane"[, ]
Write Responses:
^SCFG: "MEopMode/Airplane",
OK
ERROR
+CME ERROR
Write Command for Airplane Mode upon ME Restart
AT^SCFG="MEopMode/Airplane/OnStart"[, ]
Write Responses:
^SCFG: "MEopMode/Airplane/OnStart",
OK
ERROR
+CME ERROR
Write Command for Query/Set Timeout Value for Power Saving Mode 9:
AT^SCFG=”PowerSaver/Mode9/Timeout”[, ]
Write Responses:
^SCFG: “PowerSaver/Mode9/Timeout”,
OK
ERROR
+CME ERROR
Write Command for Radio Ouput Power Reduction: AT^SCFG=”Radio/OutputPowerReduction”[, ]
Write Response(s):
^SCFG: “Radio/OutputPowerReduction”,
OK
ERROR
+CME ERROR
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 30