AT Command Reference Guide for EDGE Wireless ... - wless.ru

More documents

Recommendations

Info

Chapter 4 – Serial Interface Control Commands 5.3 AT^SPIC Display PIN Counter Description: The AT^SPIC command can be used to find out whether the ME is waiting for a password and, if so, how many attempts are left to enter the password. The execute command returns the number of attempts still available for entering the currently required password, for example the PIN, PUK, PH-SIM PUK etc. The read command AT^SPIC indicates which password the number of attempts stated by the execute command actually refers to. Also, the write command may be used to query the counter for a specific password: It indicates the number of attempts still available for entering the password identified by , for example the PIN, PIN2, PH-SIM PIN etc. To check whether or not you need to enter a password use the read commands AT+CPIN, AT+CPIN2 and AT^SPIC. If the response to AT+CPIN is “READY” the counter of the execute command AT^SPIC relates to PIN2. See last example. If the responses to AT+CPIN and AT+CPIN2 both read “READY”, no password is currently required, and the referrer of the execute command AT^SPIC is explicitly undefined. Test Command Syntax: AT^SPIC= Response: OK Read Command Syntax: AT^SPIC Response: ^SPIC: OK Exec Command Syntax: AT^SPIC Response: ^SPIC: OK Write Command Syntax: AT^SPIC= Response: ^SPIC: OK Parameter Descriptions: Number of attempts left to enter the currently required password. This number will be counted down after each failure. Password for which the corresponding PIN counter is to be displayed. “SC“ “PS“ SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed attempts, the counter for SIM PUK will be returned instead. “Phone code” or “device code” (cf. AT+CLCK and AT+CPWD). If incorrectly entered three times, the Master Phone Code is required to lift the lock and the number of remaining attempts for the master phonecode will be returned. “P2“ SIM PIN2 or SIM PUK2. If the SIM PIN2 has been deactivated after three failed attempts, the counter for SIM PUK2 will be returned instead. “PN“ Network Personalization Identification of the currently required password. SIM PIN ME is waiting for SIM PIN1. SIM PUK ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to enter PIN1. SIM PIN2 ME is waiting for PIN2, when the attempt to access PIN2 requiring features was acknowledged with +CME ERROR:17 (e.g., if the user attempts to edit the FD phonebook). SIM PUK2 ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding command was acknowledged with +CME ERROR:18. PH-SIM PIN ME is waiting for phone-to-SIM card password if “PS” lock is active and user inserts other SIM card than the one used for the lock. (“PS” lock is also referred to as phone or antitheft lock). PH-SIM PUK ME is waiting for Master Phone Code, if the above “PS” lock password was incorrectly entered three times. PH-NET PUK ME is waiting for network personalisation unblocking password Notes: • Whenever the required password changes, changes to reflect that change. Please refer to the examples below. • For passwords associated to the phone lock (“PS” lock set by user or factory) or other factory set locks, such as “PF”, “PN”, “PU”, “PP”, “PC” the number of attempts is subject to a timing algorithm explained in AT+CPIN. If these passwords are incorrectly entered the counter first returns 3, 2 and 1 remaining attempt(s), but then gives the total number of attempts which amounts to 63 (see example below). • See also Chapters AT+CLCK, AT+CPIN, AT+CPIN2, AT+CPWD, AT^SLCK for further information on locks and passwords. Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 62
Chapter 4 – Serial Interface Control Commands Examples: Example 1 The user fails to provide a correct SIM PIN three times. The counter decreases each time. After the counter reaches zero, the SIM PUK is required. After each failure to enter a correct SIM PUK, the counter decreases. at+cpin +CPIN: SIM PIN OK Currently required password is PIN1. at^spic ^SPIC: 3 OK 3 attempts left. at+cpin=9999 +CME ERROR: incorrect password at^spic ^SPIC: 2 2 attempts left. OK at+cpin=9999 +CME ERROR: incorrect password OK at^spic ^SPIC: 1 1 attempt left. OK at+cpin=9999 +CME ERROR: incorrect password at+cpin +CPIN: SIM PUK OK Now required password is PUK 1. at^spic ^SPIC: 10 OK 10 attempts left for PUK 1. at+cpin=01234567,1234 +CME ERROR: incorrect password at^spic ^SPIC: 9 OK 9 attempts left for PUK 1. Example 2 Though a mobile is locked to a specific SIM card (phone lock), the user attempts to operate it with another SIM card. The user correctly enters the SIM PIN of the SIM card currently inserted, but then fails to give the “PS” lock password (PH-SIM PUK): at+cpin=9999 OK at+cpin +CPIN: PH-SIM PIN ME is waiting for the phone lock password. OK at^spic ^SPIC: 3 3 attempts left. OK at+cpin=4711 +CME ERROR: incorrect password at^spic ^SPIC: 2 2 attempts left. OK at+cpin=4712 +CME ERROR: incorrect password at^spic ^SPIC: 1 1 attempt left. OK at^spic ^SPIC: PH-SIM PIN Displayed counter refers to phone lock password. OK at+cpin=4713 +CME ERROR: incorrect password at^spic ^SPIC: 63 OK at^spic ^SPIC: PH-SIM PUK Displayed counter refers to master phone code. OK at+cpin=4714 +CME ERROR: incorrect password at^spic ^SPIC: 63 OK Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 63
Page 1 and 2:
Wireless EDGE Modems MultiModem ®
Page 3 and 4:
Table of Contents Table of Contents
Page 5 and 6:
Table of Contents 8.8.1 AT^MONI Res
Page 7 and 8:
Table of Contents 16.5 AT+CPBW Writ
Page 9 and 10:
Chapter 1 - Introduction Chapter 1.
Page 11 and 12: 1.5 Supported Character Sets Chapte
Page 13 and 14: Chapter 1 - Introduction Figure 1.2
Page 15 and 16: Chapter 1 - Introduction 1.5.2.2 Im
Page 17 and 18: Chapter 1 - Introduction For most o
Page 19 and 20: Chapter 2 - Configuration Commands
Page 21 and 22: 2.5 ATV Set Result Code Format Mode
Page 37 and 38: 3.2 AT+CIND Indicator control Descr
Page 39 and 40: Chapter 3 - Status Control Commands
Page 51 and 52: Chapter 4 - Serial Interface Contro
Page 61: 5.2 AT+CPIN2 PIN2 Authentication Ch
Page 65 and 66: 5.4 AT+CLCK Facility Lock Chapter 4
Page 71 and 72: Chapter 6 - Identification Commands
Page 73 and 74: Chapter 6 - Identification Commands
Page 75 and 76: 7.2 ATA Answer a Call Chapter 7 - C
Page 77 and 78: Chapter 7 - Call-Related Commands 7
Page 87 and 88: Chapter 7 - Call-Related Commands
Page 89 and 90: Chapter 7 - Call-Related Commands E
Page 93 and 94: Chapter 8 - Network Service Command
Page 107 and 108: Chapter 9 - Supplementary Service C
Page 113 and 114:
Chapter 9 - Supplementary Service C
Page 115 and 116:
Page 117 and 118:
9.10 AT+CLIR Calling Line Identific
Page 119 and 120:
Page 121 and 122:
Chapter 10 - Internet Service Comma
Page 123 and 124:
Write Command Syntax: Response: AT^
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Chapter 11 - GPRS Commands Chapter
Page 145 and 146:
11.3 AT+CGATT GPRS Attach or Detach
Page 147 and 148:
Chapter 11 - GPRS Commands 11.5 AT+
Page 149 and 150:
Chapter 11 - GPRS Commands 11.7 AT+
Page 151 and 152:
Chapter 11 - GPRS Commands This pa
Page 153 and 154:
Chapter 11 - GPRS Commands This pa
Page 155 and 156:
11.10 AT+CGQMIN Quality of Service
Page 157 and 158:
Chapter 11 - GPRS Commands 11.11 AT
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Chapter 11 - GPRS Commands AT+CGDAT
Page 169 and 170:
Chapter 12 - FAX Commands 12.3 AT+F
Page 171 and 172:
Chapter 13 - Short Message Service
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Chapter 14 - SIM-Related Commands C
Page 195 and 196:
Chapter 14 - SIM-Related Commands 1
Page 197 and 198:
Chapter 14 - SIM-Related Commands 1
Page 199 and 200:
Chapter 15 - SIM Application Toolki
Page 201 and 202:
Chapter 17 - Audio Commands Chapter
Page 203 and 204:
Chapter 17 - Audio Commands Please
Page 205 and 206:
Chapter 17 - Audio Commands 16.5 AT
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Chapter 17 - Audio Commands 16.10 A
Page 213 and 214:
Chapter 17 - Audio Commands Chapter
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Chapter 18 - Hardware-Related Comma
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Chapter 19 - Miscellaneous Commands
Page 235 and 236:
Chapter 20 - Summary Tables 20.2 St
Page 237 and 238:
Chapter 20 - Summary Tables 20.3 AT
Page 239 and 240:
Chapter 20 - Summary Tables Interne
Page 241 and 242:
Chapter 20 - Summary Tables 20.4 Av
Page 243 and 244:
Chapter 20 - Summary Tables Interne
Page 245 and 246:
Chapter 20 - Summary Tables 20.5 AT
Page 247 and 248:
Chapter 20 - Summary Tables SIM-Rel
Page 249 and 250:
Chapter 20 - Summary Tables ^SSTN ^
Page 251 and 252:
Chapter 20 - Summary Tables Command
Page 253:
Chapter 20 - Summary Tables Command
show all

AT Command Reference Guide for EDGE Wireless ... - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?