AT Command Reference Guide for EDGE Wireless ... - wless.ru

Chapter 13 – Short Message Service (SMS) Commands
13.18 AT^SCML List Concatenated Short Messages
from Preferred Store
Description:
The execute command is the same as the write command with the given default for
.
The write command returns messages with status value from message storage
to the TE. If status of the message is ‘received unread’, status in the storage
changes to ‘received read’.
Test Command Syntax: AT^SCML=
Response(s):
^SCML: (list of supported s)
OK
Exec Command Syntax: AT^SCML
Response(s):
^SCML: (see write command for default of )
OK
Write Command Syntax: AT^SCML=
Response(s):
Output if text mode (AT+CMGF=1) and command successful:
For SMS-SUBMITs and/or SMS-DELIVERs
^SCML: , , /, [], [][, /, ][,
, , , ]
[... ]
OK
For SMS-STATUS-REPORTs
^SCML: , , , , [], [], , ,
[... ]
OK
For SMS-Commands
^SCML: , , ,
[... ]
OK
Output if PDU mode (AT+CMGF=0) and command successful:
For SMS- SUBMITs and/or SMS-DELIVERs
^SCML: , , [],
[... ]
OK
If error is related to ME functionality
ERROR
+CMS ERROR
Note
• See the Notes section of the AT+CMGL command.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 186