AT Command Reference Guide for EDGE Wireless ... - wless.ru

Chapter 6 – Identification Commands
6.6 AT+CGMR Request Revision Identification
Description:
AT+CGMR delivers a product firmware version identification. Command is identical with
AT+GMR.
Test Command Syntax: AT+CGMR=
Response:
OK
Exec Command Syntax: AT+CGMR
Response:
REVISION
OK
Parameter Description:
Version xx and variant yy of software release.
6.7 AT+GMR Request Revision Identification
Description:
AT+GMR delivers a product firmware version identification. Command is identical with
AT+CGMR.
Test Command Syntax: AT+GMR=
Response:
OK
Exec Command Syntax: AT+GMR
Response:
REVISION
OK
Parameter Description:
Version xx and variant yy of software release.
6.8 AT+CGSN Request International Mobile
Equipment Identity
Description:
AT+CGSN delivers the International Mobile Equipment Identity (IMEI). Command is
identical with: AT+GSN.
Test Command Syntax: AT+CGSN=
Response:
OK
Exec Command Syntax: AT+CGSN
Response:
OK
Parameter Description:
International Mobile Equipment Identity (IMEI) used to identify a GSM mobile equipment to the GSM network.
6.9 AT+GSN Request International Mobile
Equipment Identity
Description:
AT+GSN delivers the International Mobile Equipment Identity (IMEI). Command is
identical with AT+CGSN
Test Command Synatx: AT+GSN=
Response:
OK
Exec Command Syntax: AT+GSN
Response:
OK
Parameter Description:
International Mobile Equipment Identity (IMEI) used to identify a GSM mobile equipment to the GSM network.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 72