AT Command Reference Guide for EDGE Wireless ... - wless.ru

More documents

Recommendations

Info

Copyright and Technical Support AT Commands for Multi-Tech EDGE Modems MultiModem® EDGE with Bluetooth Interface (MTCBA-E-B) MultiModem® EDGE with Ethernet Interface (MTCBA-E-EN) MultiModem® EDGE with GPS Functionality (MTCBA-E-GP) MultiModem® EDGE (MTCBA-E) MultiModem® EDGE with USB (MTCBA-E-U) Embedded Wireless SocketModem® EDGE (MTSMC-E) Reference Guide PN S000371B, Revision B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2005-2006, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revisions Revision Level Date Description A 07/07/05 Initial release. B 01/24/06 Added trademarks and registered trademarks to the cover page. Added a product list and a command list. Removed the statement in 18.6 that the setting is stored non-volatile. Changed light blue non-hyperlinked text to black. Trademarks MultiModem, SocketModem, and the Multi-Tech logo are registered trademarks of Multi-Tech Systems, Inc. World Headquarters Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 Phone: 763-785-3500 or 800-328-9717 Fax: 763-785-9874 Technical Support Country By Email By Phone France: support@multitech.fr (33) 1-64 61 09 81 India: support@multitechindia.com 91 (124) 6340778 U.K.: support@multitech.co.uk (44) 118 959 7774 U.S. and Canada: support@multitech.com (800) 972-2439 Rest of the World: support@multitech.com (763) 717-5863 Internet Address: http://www.multitech.com Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 2
Table of Contents Table of Contents Chapter 1. Introduction..............................................................................................................................................9 1.1 Scope of the Document......................................................................................................................................9 1.2 Related Documents............................................................................................................................................9 1.3 Document Conventions......................................................................................................................................9 1.4 AT Command Syntax .......................................................................................................................................10 1.4.1 Using Parameters ......................................................................................................................................10 1.4.2 Combining AT Commands on the Same Command Line...........................................................................10 1.5 Supported Character Sets................................................................................................................................11 1.5.1 GSM Alphabet Tables and UCS2 Character Values..................................................................................12 1.5.2 UCS2 and GSM Data Coding and Conversion for SMS Text Mode...........................................................14 1.6 Serial Interface Flow Control............................................................................................................................16 1.6.1 Software Flow Control (XON/OFF Handshake) .........................................................................................16 1.6.2 Hardware Flow Control (RTS/CTS Handshake).........................................................................................16 1.7 Unsolicited Result Code Presentation..............................................................................................................16 1.7.1 Communication between Customer Application and Multi-Tech Wireless Modem ....................................17 1.8 Common PCN Handset Specification (CPHS) .................................................................................................18 1.9 Errors and Messages .......................................................................................................................................18 Chapter 2. Configuration Commands.....................................................................................................................19 2.1 AT&F Set All Current Parameters to Manufacturer Defaults ..........................................................................19 2.2 AT&V Display Current Configuration..............................................................................................................19 2.2.1 AT&V Responses.......................................................................................................................................20 2.3 AT&W Stores Current Configuration ..............................................................................................................20 2.4 ATQ Set Result Code Presentation Mode......................................................................................................20 2.5 ATV Set Result Code Format Mode...............................................................................................................21 2.5.1 Verbose and Numeric Result Codes..........................................................................................................21 2.6 ATX Set CONNECT Result Code Format and Call Monitoring ......................................................................22 2.7 AT\ V Set CONNECT Result Code Format ....................................................................................................22 2.8 ATZ Set all Current Parameters to User Defined Profile ................................................................................22 2.9 AT+CFUN Set Phone Functionality................................................................................................................23 2.9.1 Wake up the ME from SLEEP Mode..........................................................................................................24 2.10 AT^SMSO Switch off Mobile Station ............................................................................................................25 2.11 AT+GCAP Request Complete TA Capabilities List ......................................................................................25 2.12 AT+CMEE Mobile Equipment Error Message Format..................................................................................25 2.12.1 CME/CMS Error Code Overview................................................................................................................26 2.13 AT+CSCS Select TE Character Set .............................................................................................................29 2.14 AT^SCFG Extended Configuration Settings.................................................................................................29 Chapter 3. Status Control Commands ...................................................................................................................36 3.1 AT+CMER Mobile Equipment Event Reporting..............................................................................................36 3.2 AT+CIND Indicator control .............................................................................................................................37 3.3 AT^SIND Extended Indicator Control.............................................................................................................39 3.4 AT+CEER Extended Error Report..................................................................................................................43 3.4.1 Cause Location ID for the Extended Error Report......................................................................................44 3.4.2 GSM Release Cause for L3 Radio Resource (RR) ....................................................................................44 3.4.3 GSM Release Cause for Mobility Management (MM)..................................................................................45 3.4.4 GSM Release Cause for L3 Call Control (CC) .............................................................................................46 3.4.5 GSM Release Cause for Supplementary Service Call ...............................................................................47 3.4.6 GSM Cause for L3 Protocol Module or Other Local Cause........................................................................48 3.4.7 Release Cause for GPRS API ...................................................................................................................48 3.4.8 Release Cause for PPP/IP-Stack...............................................................................................................48 3.5 ATS18 Extended Call Release Report ...........................................................................................................49 3.6 AT+CPAS Mobile Equipment Activity Status..................................................................................................49 3.7 AT+WS46 Select Wireless Network...............................................................................................................50 Chapter 4. Serial Interface Control Commands.....................................................................................................51 4.1 AT\Q Flow Control..........................................................................................................................................51 4.2 AT&C Set Circuit Data Carrier Detect (DCD) Function Mode.........................................................................51 4.3 AT&D Set Circuit Data Terminal Ready (DTR) Function Mode......................................................................51 4.4 AT&S Set Circuit DSR Function Mode ...........................................................................................................52 4.5 ATE Enable Command Echo .........................................................................................................................52 4.6 AT+ICF Serial Interface Character Framing...................................................................................................52 4.7 AT+IFC Set Flow Control Separately for Data Directions...............................................................................53 4.8 AT+ILRR Set TE-TA Local Rate Reporting ....................................................................................................53 Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 3
Page 1: Wireless EDGE Modems MultiModem ®
Page 5 and 6: Table of Contents 8.8.1 AT^MONI Res
Page 7 and 8: Table of Contents 16.5 AT+CPBW Writ
Page 9 and 10: Chapter 1 - Introduction Chapter 1.
Page 11 and 12: 1.5 Supported Character Sets Chapte
Page 13 and 14: Chapter 1 - Introduction Figure 1.2
Page 15 and 16: Chapter 1 - Introduction 1.5.2.2 Im
Page 17 and 18: Chapter 1 - Introduction For most o
Page 19 and 20: Chapter 2 - Configuration Commands
Page 21 and 22: 2.5 ATV Set Result Code Format Mode
Page 37 and 38: 3.2 AT+CIND Indicator control Descr
Page 39 and 40: Chapter 3 - Status Control Commands
Page 51 and 52: Chapter 4 - Serial Interface Contro
Page 53 and 54:
Chapter 4 - Serial Interface Contro
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
5.2 AT+CPIN2 PIN2 Authentication Ch
Page 63 and 64:
Page 65 and 66:
5.4 AT+CLCK Facility Lock Chapter 4
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Chapter 6 - Identification Commands
Page 73 and 74:
Chapter 6 - Identification Commands
Page 75 and 76:
7.2 ATA Answer a Call Chapter 7 - C
Page 77 and 78:
Chapter 7 - Call-Related Commands 7
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Chapter 7 - Call-Related Commands
Page 89 and 90:
Chapter 7 - Call-Related Commands E
Page 91 and 92:
Page 93 and 94:
Chapter 8 - Network Service Command
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Chapter 9 - Supplementary Service C
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
9.10 AT+CLIR Calling Line Identific
Page 119 and 120:
Page 121 and 122:
Chapter 10 - Internet Service Comma
Page 123 and 124:
Write Command Syntax: Response: AT^
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Chapter 11 - GPRS Commands Chapter
Page 145 and 146:
11.3 AT+CGATT GPRS Attach or Detach
Page 147 and 148:
Chapter 11 - GPRS Commands 11.5 AT+
Page 149 and 150:
Chapter 11 - GPRS Commands 11.7 AT+
Page 151 and 152:
Chapter 11 - GPRS Commands This pa
Page 153 and 154:
Chapter 11 - GPRS Commands This pa
Page 155 and 156:
11.10 AT+CGQMIN Quality of Service
Page 157 and 158:
Chapter 11 - GPRS Commands 11.11 AT
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Chapter 11 - GPRS Commands AT+CGDAT
Page 169 and 170:
Chapter 12 - FAX Commands 12.3 AT+F
Page 171 and 172:
Chapter 13 - Short Message Service
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Chapter 14 - SIM-Related Commands C
Page 195 and 196:
Chapter 14 - SIM-Related Commands 1
Page 197 and 198:
Chapter 14 - SIM-Related Commands 1
Page 199 and 200:
Chapter 15 - SIM Application Toolki
Page 201 and 202:
Chapter 17 - Audio Commands Chapter
Page 203 and 204:
Chapter 17 - Audio Commands Please
Page 205 and 206:
Chapter 17 - Audio Commands 16.5 AT
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Chapter 17 - Audio Commands 16.10 A
Page 213 and 214:
Chapter 17 - Audio Commands Chapter
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Chapter 18 - Hardware-Related Comma
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Chapter 19 - Miscellaneous Commands
Page 235 and 236:
Chapter 20 - Summary Tables 20.2 St
Page 237 and 238:
Chapter 20 - Summary Tables 20.3 AT
Page 239 and 240:
Chapter 20 - Summary Tables Interne
Page 241 and 242:
Chapter 20 - Summary Tables 20.4 Av
Page 243 and 244:
Chapter 20 - Summary Tables Interne
Page 245 and 246:
Chapter 20 - Summary Tables 20.5 AT
Page 247 and 248:
Chapter 20 - Summary Tables SIM-Rel
Page 249 and 250:
Chapter 20 - Summary Tables ^SSTN ^
Page 251 and 252:
Chapter 20 - Summary Tables Command
Page 253:
Chapter 20 - Summary Tables Command
show all

AT Command Reference Guide for EDGE Wireless ... - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?