10.01.2015 Views

AT Command Reference Guide for EDGE Wireless ... - wless.ru

AT Command Reference Guide for EDGE Wireless ... - wless.ru

AT Command Reference Guide for EDGE Wireless ... - wless.ru

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 10 – Internet Service <strong>Command</strong>s<br />

10.7 In<strong>for</strong>mation Elements Related to Internet<br />

Service URCs<br />

This section describes the in<strong>for</strong>mation elements which may be presented by the “^SIS” URC after opening an<br />

Internet service. See also <strong>AT</strong>^SISO.<br />

The tables contain the and, if applicable, a specific . If marked with *) the precise<br />

text related to a varies greatly depending on the scenario and the implementation of the<br />

remote server. In these cases, only a brief explanation of the scenario can be found in the column “Description”.<br />

10.7.1 URC In<strong>for</strong>mation Elements Related to the Service Application<br />

The following table lists URC in<strong>for</strong>mation elements which may be returned by all supported services. It should<br />

be noted that TCP/IP socket problems may occur in all Internet service connections (Socket, FTP, HTTP, POP3<br />

or SMTP).<br />

Description<br />

URC In<strong>for</strong>mation Elements Returned by the TCP/IP socket<br />

2 Socket error: Invalid socket descriptor<br />

3 Socket error: Bad access specified<br />

4 Socket error: Invalid operation<br />

5 Socket error: No free socket descriptors<br />

6 Socket error: The operation would block<br />

7 Socket error: A previous attempt at this operation is still ongoing<br />

8 Socket error: Socket is not bound<br />

9 Socket error: The supplied buffer is too small/large<br />

10 Socket error: Flags not supported<br />

11 Socket error: Operation not supported<br />

12 Socket error: The address is already in use<br />

13 Socket error: The network is unavailable<br />

14 Socket error: An established connection was aborted<br />

15 Socket error: Remote host has reset the connection<br />

16 Socket error: No buffer space available<br />

17 Socket error: The socket is already connected<br />

18 Socket error: The socket is not connected<br />

19 Socket error: Socket has been shut down<br />

20 Socket error: Connection timed out<br />

21 Socket error: Remote host has rejected the connection<br />

22 Socket error: Remote host is unreachable<br />

23 Socket error: An unexpected error occurred<br />

24 DNS error: Host not found<br />

25 DNS error: An error occurred that may be transient; a further<br />

attempt may succeed.<br />

26 DNS error: An unrecoverable error occurred<br />

General URC In<strong>for</strong>mation Elements<br />

46 Fatal: The service has detected an unknown error<br />

47 *) Indicates that the remote<br />

service has closed the<br />

connection. The host shall<br />

close the service.<br />

48 Fatal: No memory is available <strong>for</strong> service action<br />

49 Fatal: Service hs detected an internal error.<br />

Multi-Tech Systems, Inc. <strong>AT</strong> <strong>Command</strong>s <strong>for</strong> <strong>EDGE</strong> Modems (S000371B) 141

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!