AT Command Reference Guide for EDGE Wireless ... - wless.ru

More documents

Recommendations

Info

Chapter 13 – Short Message Service (SMS) Commands 13.28 AT^SSMSS Set Short Message Storage Sequence Description: The short message storage “MT” (see AT+CPMS) is a logical storage. It consists of two physical storages “ME” and “SM”. This command allows to select the sequence of addressing this storage. Test Command Syntax: AT^SSMSS= Response: ^SSMSS: (list of supported) s Read Command Syntax: AT^SSMSS Response: ^SSMSS: OK Write Command Syntax: AT^SSMSS= Response: OK Parameter Description: MT sequence 0 “MT” storage is “ME” then “SM”. Default. 1 “MT” storage is “SM” then “ME” Note: Access to the SIM storage is faster. For compatibility with previous software re-leases, the “MT” sequence =0 is the factory default. Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 192
Chapter 14 – SIM-Related Commands Chapter 14. SIM-Related Commands The AT commands described in this chapter are related to the Subscriber Identity Module (SIM) connected to the Multi-Tech wireless modem. If using data from the SIM please bear in mind that the content of all Elementary Files is subject to change at any moment! This is true because the network can change the SIM’s data in the background via the SIM Application Toolkit (SAT) procedure “Data download to SIM”. For a detailed description please refer to GSM 11.14. To get informed that changing Elementary Files has taken place the TA needs to hook to the SAT Proactive Command “REFRESH”. To achieve this, the AT command interface of SAT, i.e., Remote-SAT, needs to be activated. An overview is given at Chapter 15, SIM Application Toolkit (SAT) Commands, additional information is available with the document “Remote-SAT User Guide” . 14.1 AT+CRSM Restricted SIM Access Description: AT+CRSM offers easy access of the Elementary Files on the SIM. Access to the SIM database is restricted to the commands which are listed at . However, additional SIM commands are available via AT^SXSM. All parameters of AT+CRSM are used as specified by GSM 11.11 [21]. The Multi-Tech wireless modem handles internally all required SIM interface locking and file selection routines. As response to the command, the Multi-Tech wireless modem sends the actual SIM information parameters and response data. Error result code “+CME ERROR” may be returned if the command cannot be passed to the SIM; e.g., if the SIM is not inserted. However, failure in the execution of the command in the SIM is reported in and parameters. AT+CRSM requires PIN authentication. However, using “READ BINARY” and “READ RECORD” is possible before PIN authentication and if the SIM is blocked (state after three failed PIN authentication attempts) to access the contents of the following Elementary Files: EF Symbol EF Name EF ID (hex.) EF ID (dec.) EFICCID ICC identification 2FE2 12258 EFELP Extended language preference 2F05 12037 EFLP Language preference 6F05 28421 EFSPN Service provider name 6F46 28486 EFAD Administrative data 6FAD 28589 EFPhase Phase identification 6FAE 28590 EFECC Emergency call codes 6FB7 28599 Please beware of possible changes to Elementary Files by the network at any time, refer to Chapter 14, SIM-Related Commands. Test Command Syntax: AT+CRSM= Response: OK Write Command Syntax: AT+CRSM=[, [, , , [, ]]] Response: +CRSM: ,[,] OK ERROR +CME ERROR: Parameter Descriptions: SIM command number. 176 READ BINARY 178 READ RECORD 192 GET RESPONSE 214 UPDATE BINARY 220 UPDATE RECORD 242 STATUS Identifier for an elementary data file on SIM, if used by . Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 193
Page 1 and 2:
Wireless EDGE Modems MultiModem ®
Page 3 and 4:
Table of Contents Table of Contents
Page 5 and 6:
Table of Contents 8.8.1 AT^MONI Res
Page 7 and 8:
Table of Contents 16.5 AT+CPBW Writ
Page 9 and 10:
Chapter 1 - Introduction Chapter 1.
Page 11 and 12:
1.5 Supported Character Sets Chapte
Page 13 and 14:
Chapter 1 - Introduction Figure 1.2
Page 15 and 16:
Chapter 1 - Introduction 1.5.2.2 Im
Page 17 and 18:
Chapter 1 - Introduction For most o
Page 19 and 20:
Chapter 2 - Configuration Commands
Page 21 and 22:
2.5 ATV Set Result Code Format Mode
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
3.2 AT+CIND Indicator control Descr
Page 39 and 40:
Chapter 3 - Status Control Commands
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Chapter 4 - Serial Interface Contro
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
5.2 AT+CPIN2 PIN2 Authentication Ch
Page 63 and 64:
Page 65 and 66:
5.4 AT+CLCK Facility Lock Chapter 4
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Chapter 6 - Identification Commands
Page 73 and 74:
Chapter 6 - Identification Commands
Page 75 and 76:
7.2 ATA Answer a Call Chapter 7 - C
Page 77 and 78:
Chapter 7 - Call-Related Commands 7
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Chapter 7 - Call-Related Commands
Page 89 and 90:
Chapter 7 - Call-Related Commands E
Page 91 and 92:
Page 93 and 94:
Chapter 8 - Network Service Command
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Chapter 9 - Supplementary Service C
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
9.10 AT+CLIR Calling Line Identific
Page 119 and 120:
Page 121 and 122:
Chapter 10 - Internet Service Comma
Page 123 and 124:
Write Command Syntax: Response: AT^
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142: Chapter 10 - Internet Service Comma
Page 143 and 144: Chapter 11 - GPRS Commands Chapter
Page 145 and 146: 11.3 AT+CGATT GPRS Attach or Detach
Page 147 and 148: Chapter 11 - GPRS Commands 11.5 AT+
Page 149 and 150: Chapter 11 - GPRS Commands 11.7 AT+
Page 151 and 152: Chapter 11 - GPRS Commands This pa
Page 153 and 154: Chapter 11 - GPRS Commands This pa
Page 155 and 156: 11.10 AT+CGQMIN Quality of Service
Page 157 and 158: Chapter 11 - GPRS Commands 11.11 AT
Page 167 and 168: Chapter 11 - GPRS Commands AT+CGDAT
Page 169 and 170: Chapter 12 - FAX Commands 12.3 AT+F
Page 171 and 172: Chapter 13 - Short Message Service
Page 191: Chapter 13 - Short Message Service
Page 195 and 196: Chapter 14 - SIM-Related Commands 1
Page 197 and 198: Chapter 14 - SIM-Related Commands 1
Page 199 and 200: Chapter 15 - SIM Application Toolki
Page 201 and 202: Chapter 17 - Audio Commands Chapter
Page 203 and 204: Chapter 17 - Audio Commands Please
Page 205 and 206: Chapter 17 - Audio Commands 16.5 AT
Page 211 and 212: Chapter 17 - Audio Commands 16.10 A
Page 213 and 214: Chapter 17 - Audio Commands Chapter
Page 225 and 226: Chapter 18 - Hardware-Related Comma
Page 233 and 234: Chapter 19 - Miscellaneous Commands
Page 235 and 236: Chapter 20 - Summary Tables 20.2 St
Page 237 and 238: Chapter 20 - Summary Tables 20.3 AT
Page 239 and 240: Chapter 20 - Summary Tables Interne
Page 241 and 242: Chapter 20 - Summary Tables 20.4 Av
Page 243 and 244:
Chapter 20 - Summary Tables Interne
Page 245 and 246:
Chapter 20 - Summary Tables 20.5 AT
Page 247 and 248:
Chapter 20 - Summary Tables SIM-Rel
Page 249 and 250:
Chapter 20 - Summary Tables ^SSTN ^
Page 251 and 252:
Chapter 20 - Summary Tables Command
Page 253:
Chapter 20 - Summary Tables Command
show all

AT Command Reference Guide for EDGE Wireless ... - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?