MULTI TYPE

No. Part to be replaced Work procedure Remarks
5 Reactor assembly
WARNING
Wear a pair of gloves.
Otherwise, you will risk an injury involving a
replacement part or some other object.
• 14, 16HP case
3) Screw
Fixing claw (slide stopper to right)
1. Detachment
1)Stop the operation, and turn off the circuit breaker.
2)Remove the inverter assembly.
(See the inverter assembly dismantling method
under item 4.)
3)
Screw
3)With a 14, 16HP unit, remove the separately
mounted reactor box.
To remove the reactor box, remove the screws
at the top and bottom (M5 × 10) and unlock the
box by sliding the stopper to the right.
* Before pulling the reactor box, tilt it back to free
the bottom.
4)Remove the reactor box located at the back of the
inverter assembly.
(M4 × 6, 4 pcs.)
* The screws can be removed from the front.
Fixing claw (slide stopper to right)
4) Screws (2 locations)
With a 14, 16HP unit, remove the separately
mounted anchor plate.
(M4 × 6, 4 pcs.)
5)Remove and replace the reactor.
(M4 × 6, 1 pc.)
4) Screws (2 locations)
• 8, 10, 12HP case
[
4) Screws (2 locations)
4) Screws (2 locations)
268