Installation and User's Guide

When you enter your password, the password is not displayed on your screen.Displaying Euro characters in a command-line promptThis topic explains how to display the Euro character in the Windowscommand-line prompt (console window).1. Contact your Microsoft Representative for the 858 code page (the file name isc_858.nls). Copy the file into your Windows system32 directory (for example,C:\WINNT\system32).2. Edit the Windows Registry key, using this command: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage\850, and set it to valuec_858.nls. Any changes that you make to the Windows Registry editorcannot be undone. Errors made in editing the Windows Registry can causeyour system to malfunction, and you might not even be able to restart yoursystem. Be very careful when editing the Windows Registry. If you areunfamiliar with using the Windows Registry editor, then ask someone else whois familiar with the Windows Registry editor to help you.3. In your Regional Settings, select a Western European country (Germany, France,Italy, etc.) as your locale setting.4. Exit and reboot the system.Ensure that the console window font that you use supports the Euro symbol (suchas Lucida Console).Use options on the DSMC commandThis topic shows some examples of how to use options on the dsmc command.For example, suppose you have one workstation with node name galaxy1, andanother workstation with node name galaxy2, and you want to restore the datafrom galaxy1 to the galaxy2 system. To recover a file from one workstation(galaxy1) while at the other workstation (galaxy2), you must access galaxy1. Usethe set access command to gain access.For example, assume the file to be recovered on galaxy1 is c:\universe\saturn.planet. The owner of galaxy1 enters the following command:dsmc set access archive c:\universe\saturn.planet galaxy2When access is granted, you would retrieve the file by entering the followingcommand:dsmc retrieve -fromnode=galaxy1 \\galaxy1\universe\saturn.planet c:\Note: Access to the files of another user can also be granted and gained using theGUI.If you have more than one backup server in your organization, you can easilyswitch between them using a command-line option. To override the serverspecified in dsm.opt, you could use a command such as this:dsmc -tcpserveraddress=myserver -node=mynode -tcpport=159988 IBM Tivoli Storage Manager for Windows Backup-Archive Clients: Installation and User's Guide