Installation and User's Guide

Syntax►► VERIFYImage ►◄ParametersThere are no parameters for this option.ExamplesCommand line:dsmc restore image d: -verifyimageVirtualfsnameUse the virtualfsname option with the backup group command to specify thename of the virtual file space for the group on which you want to perform theoperation. The virtualfsname cannot be the same as an existing file space name.Supported ClientsThis option is valid for all Windows clients.Syntax►► VIRTUALFsname = fsname ►◄VirtualnodenameParametersfsnameSpecifies the name of the container for the group on which you want toperform the operation.ExamplesCommand line:backup group -filelist=c:\dir1\filelist1 -groupname=group1-virtualfsname=\virtfs -mode=fullThe virtualnodename option specifies the node name of your workstation whenyou want to restore or retrieve files to a different workstation.When you use the virtualnodename option in your client options file, or with acommand:vvYou must specify the name you specified with the nodename option in yourclient options file (dsm.opt). This name should be different from the namereturned by the hostname command on your workstation.Tivoli Storage Manager prompts for the password assigned to the node youspecify, if a password is required. If you enter the correct password, you haveaccess to all backups and archives that originated from the specified node.When connecting to a server, the client must identity itself to the server. This loginidentification is determined in the following ways:Chapter 12. Processing options 505