Installation and User's Guide

Table 35. Client return codes and their meanings (continued)Code Explanationother For scheduled operations where the scheduled action is COMMAND, thereturn code is the return code from the command that was executed. If thereturn code is 0, the status of the scheduled operation is Completed. Ifthereturn code is nonzero, then the status is Failed.Some commands might issue a nonzero return code to indicate success. Forthese commands, you can avoid a Failed status by wrapping the command ina script that invokes the command, interprets the results, and exits withreturn code 0 if the command was successful (the script should exit with anonzero return code if the command failed). Then ask your Tivoli Storagemanager server administrator to modify the schedule definition to invokeyour script instead of the command.The return code for a client macro is the highest return code issued among theindividual commands that comprise the macro. For example, suppose a macroconsists of these commands:selective c:\MyTools\* -subdir=yesincremental c:\MyPrograms\TestDriver\* -subdir=yesarchive e:\TSM510C\* -subdir=yesIf the first command completes with return code 0; the second commandcompleted with return code 8; and the third command completed with return code4, the return code for the macro is 8.See the IBM Tivoli Storage Manager Administrator's Reference for your operatingsystem for more information about QUERY EVENT.234 IBM Tivoli Storage Manager for Windows Backup-Archive Clients: Installation and User's Guide