Installation and User's Guide

This option differs from the filesonly option in that the filesonly option archivesthe directories that exist in the path of the source file specification.The v2archive and dirsonly options are mutually exclusive and an error message isdisplayed if you use both options in the same archive command.If you use this option, you might want to consider the following:v You might experience performance problems when retrieving large amounts ofdata archived with this option.v You might want to use this option only if you are concerned about expirationperformance on a server that already contains extremely large amounts ofarchived data.v If there are multiple files with the same name for the v2archive option, the filesare archived multiple times, with their directory structure. The v2archive optionarchives only the files.Supported ClientsThis option is valid for all clients. The Tivoli Storage Manager client API does notsupport this option.Syntax►► V2archive ►◄ParametersThere are no parameters for this option.ExamplesThis command:dsmc archive c:\relx\dir1\ -v2archive -su=yArchives these files:c:\relx\dir1\file1c:\relx\dir1\file2c:\relx\dir1\file3c:\relx\dir1\dir2\file4c:\relx\dir1\dir2\file5Note: Tivoli Storage Manager does not archive c:\relx\dir1 andc:\relx\dir1\dir2.VerboseThe verbose option specifies that you want to display detailed processinginformation on your screen. This is the default.When you run the incremental, selective, orarchive commands, information isdisplayed about each file that is backed up. Use the quiet option if you do notwant to display this information.The following behavior applies when using the verbose and quiet options:Chapter 12. Processing options 503