Installation and User's Guide

includes this message: Command will be executed in 1 minute. After oneminute, the CAD starts the scheduler and you see information regarding thenext scheduled event in the dsmwebcl.log file.Related concepts“Dsmcutil commands: Required options and examples” on page 251Related tasks“Dsmcutil valid options” on page 258Creating a new scheduler and associating a CAD to manage theschedulerThis section provides step-by-step instructions to create a new scheduler andassociate a CAD to manage the scheduler.Follow these steps to create a new scheduler and associate a CAD:1. Set the managedservices option to schedule in the client options file (dsm.opt).2. Create the scheduler service: dsmcutil install scheduler/name:"NEW_SCHEDULE_NAME" /node:yournode /password:xxxxx /startnow:no.Do not use the /autostart:yes option when installing a scheduler that ismanaged by the CAD.3. Create the CAD service: dsmcutil install cad /node:yournode/password:xxxxx /autostart:yes /startnow:no.4. Associate the scheduler with the CAD: dsmcutil update cad /name:"tsmclient acceptor" /cadschedname:"NEW_SCHEDULE_NAME".5. Start the CAD: dsmcutil start cad /name:"tsm client acceptor".Note: The CAD and scheduler starts, as described above. Since the CAD iscontrolling the scheduler, you do not see the scheduler running as a service, eitherthrough the Services applet or the NET START command. To stop the scheduler,you must stop the CAD.Setting up a schedule to back up system objects (WindowsXP)This section provides step-by-step instructions to set up a Tivoli Storage Managerclient schedule to back up file systems on weekdays and back up theSYSTEMOBJECT domain on Saturdays. Both schedules run in CAD-managedmode.1. To set up a schedule to back up your file systems on weekdays, enter: defineschedule your_domain weekday_backup action=incremental option="-domain=-systemobject" starttime=20:00:00 dayofweek=weekday.To associate the backup-archive client to this schedule, enter: define assocyour_domain weekday_backup nodename. To set up a schedule to back up yourSYSTEMOBJECT domain on Saturdays, enter: define schedule your_domainsaturday_backup action=incremental option="-domain= systemobject"starttime=21:00:00 dayofweek=saturday. To associate thebackup-archive client to this schedule, enter: define assoc your_domainsaturday_backup nodename. The subtle difference between the two scheduledefinitions is that the weekday schedule has a minus ('-') in front of"systemobject" to explicitly remove the SYSTEMOBJECT domain.2. The Tivoli Storage Manager client option file (dsm.opt) changes are: domain c:d: .250 IBM Tivoli Storage Manager for Windows Backup-Archive Clients: Installation and User's Guide