Installation and User's Guide

For more information about installing and configuring the Tivoli Storage ManagerManaged System for SAN Storage Agent, refer to the IBM Tivoli Storage ManagerStorage Agent User's Guides.LAN-free data movement optionsThis topic describes the options that you can use to enable LAN-free datamovement, after you have installed and configured the Tivoli Storage ManagerManaged System for SAN feature on the client workstation.The following are the options that you can use to enable LAN-free data movement:enablelanfreeSpecifies whether to enable an available LAN-free path to a SAN-attachedstorage device.lanfreecommmethodSpecifies a communication protocol between the client and the Storage Agent.lanfreeshmportSpecifies the unique number that is used by the client and the storage agent toidentify shared memory area used for communications.lanfreetcpportSpecifies the TCP/IP port number where the Storage Agent is listening.lanfreetcpserveraddressSpecifies the TCP/IP address for the Tivoli Storage Manager storage agent.Related reference“Enablelanfree” on page 359“Lanfreecommmethod” on page 404“Lanfreeshmport” on page 406“Lanfreetcpport” on page 406“Lanfreetcpserveraddress” on page 407Unicode file spaces (Windows)The Windows client is Unicode-enabled. However, client versions before Version4.2 were not enabled for Unicode.If you are backing up a system that had at one time used a client version olderthan Version 4.2, and the file spaces have not yet been migrated to Unicode, thenyou need to plan for the migration of file spaces to Unicode. This involvesrenaming your file spaces on the server and creating new Unicode-enabled filespaces on the server using the autofsrename option.Chapter 4. Backing up your data 107