Installation and User's Guide

2. Click on the Edit button and select Add resource. The Add Resource windowopens.3. Enter the name you want to give the resource in Resource Name field.4. Select the Resource Type as RegRep. The attributes of the RegRep resourcetype appear.5. Click the Edit button to modify the resource attributes.6. Select the MountResName attribute and enter the shared disk on which youwant to store the registry keys.7. When you are finished, close the window. The Configuration window promptsyou whether to save the configuration; click Yes.The client acceptor service is now a resource in the same group. If the group ismoved (failed) to the other nodes in the cluster, the service should correctly failover between the cluster nodes and notify both cluster nodes of automaticpassword changes.Note:1. If you manually change the password, you must stop the remote agent and theclient acceptor services, regenerate the password, and restart the client acceptorservice (do not restart the remote agent). You can generate the password byrunning this command: dsmc query session -optfile="q:\tsm\dsm.opt"2. See “Frequently asked questions” on page 60 for information on what to do if ageneric service resource for the cluster group fails because the CAD service hasbeen removed.Step 6: Start the Web client:This topic guides you through the steps to start the Web client to use clusterservices.1. Start the Tivoli Storage Manager Client Acceptor Service for each resourcegroup on each node.2. To start the Web client, point your browser at the IP address and httpportspecified for the Resource Group. For example, if you used an IP address of9.110.158.205 and specified an httpport value of 1583, open the web address:http://9.110.158.205:1583.Alternatively, you can point your browser at the network name and httpport. Forexample, if you used a network name of cluster1groupa and specified an httpportvalue of 1583, open the web address: http://cluster1groupa:1583.Note that the Web client connects to whichever workstation currently owns theresource group. The Web client displays all of the local file spaces on thatworkstation, but to ensure that the files are backed up with the correct node nameyou should only back up the files for the resource group.When failing back to the original node after a failover scenario, ensure that theremote agent service on the original workstation is stopped. The remote agent canbe stopped manually, or it stops automatically after 20 to 25 minutes of inactivity.Because the remote agent is configured for manual startup, it will not startautomatically if the workstation on which it was running is rebooted.Chapter 2. Configure the Tivoli Storage Manager client 59