Installation and User's Guide

Using the Microsoft Cluster Administrator utility or VCS Configuration Editor,move group-a to node-2. Fromnode-2, issue the same commands above to installthe services on node-2 and generate a password file. Repeat this procedure for eachcluster group.Step 4: Create a network name and IP address resource:Add a network name and IP address resource for each group that is managed bythe client, using the Microsoft Cluster Administrator or VCS Configuration Editor.MSCS:You must use the Microsoft Cluster Administrator utility to add an IP addressresource to each cluster group managed by Tivoli Storage Manager.Follow these steps to add an IP address resource:1. Select the group-a folder under the MSCS-Cluster\Groups folder and select File–> New–> Resource from the dropdown menu.2. In the New Resource dialog, enter a unique name in the Name field. Forexample: IP address for GROUP-A. Enter a description in the Description field.Change resource type to IP address in the Resource Type field. Enter the groupname in the Group field. Press Enter.3. In the Possible Owner dialog, ensure that all cluster nodes appear as possibleowners. Press Enter.4. In the Dependencies dialog add all physical disk resources as ResourceDependencies. Press Enter.5. In the TCP/IP Address dialog, enter appropriate values for address,subnetmask, and network. Press Enter.6. Select the new resource from the Microsoft Cluster Administrator utility, andfrom the dropdown menu click File and then Bring Online.You must use the Microsoft Cluster Administrator utility to add a network nameto each cluster group managed by Tivoli Storage Manager.Follow these steps to add a network name:1. Select the group-a folder under the MSCS-Cluster\Groups folder and select File–> New –> Resource from the dropdown menu.2. In the New Resource dialog, enter a unique name in the Name field. Forexample: Network Name for GROUP-A. Enter a description in the Descriptionfield. Change resource type to Network Name in the Resource Type field. Enterthe group name in the Group field. Press Enter.3. In the Possible Owner dialog, ensure that all cluster nodes appear as possibleowners. Press Enter.4. In the Dependencies dialog add the IP address resource and all physical diskresources as Resource Dependencies. Press Enter.5. In the Network Name Parameters dialog, enter a network name for GROUP-A.Press Enter.6. Select the new resource from the Microsoft Cluster Administrator utility, andfrom the dropdown menu click File and then Bring Online.The IP address and network name to backup the disks in the cluster group arenow resources in the same group.56 IBM Tivoli Storage Manager for Windows Backup-Archive Clients: Installation and User's Guide