Installation and User's Guide

cadschedname:schedulernameSpecifies the name of the scheduler service to manage with the CAD. Usethis option when the managedservices option is set to schedule in the clientoptions file dsm.opt. You can specify this option only with the CADservice./clientdir:clientdirThe fully qualified directory path where the Client Service files reside. Thisdirectory should be relative to the target workstation where the service isinstalled. UNC names are not allowed if the local system account is set tologon. The default is the current directory./clustername:clusternameThis option replaces the /group option.The /clustername option specifies the cluster name to which the systembelongs. You can determine the cluster name in any of the following ways:vvvOn MSCS, run the MSCS command, CLUSTER /LIST, from thecommand line or use the Cluster Administrator utility. When the ClusterAdministrator utility starts, it displays a tree-like structure with thecluster name at the top.On VCS, use the VCS Cluster Manager - Java Console or open themain.cf file in the %VCS_HOME%\config directory.On VCS, use the following command:haclus -displayRestriction: Do not specify a clustername of more than 64 characters. Ifyou specify more than 64 characters and you are using Veritas StorageFoundation with High Availability or a Microsoft Cluster Serverconfiguration, you might not be able to install or start the Tivoli StorageManager scheduler service.This option must be used with the /clusternode:Yes option. This optionmust be specified when using the INSTALL command in a clusterenvironment. It must also be specified when using the UPDATE commandto modify the cluster settings (/clusternode and /clustername).This option can also be specified when using the UPDATEPW command ina cluster environment. Normally this is not required. However, if morethan one scheduler service with different cluster settings are defined for aparticular node, the utility cannot determine which settings are correct. Inthis case, correct the discrepancies between the services.Alternatively, you can specify this option with /clusternode:Yes and/force:Yes, to force the utility to show or update the password with thespecified cluster settings.This option is not required if /clusternode:No is specified./clusternode:Yes|NoSpecifies whether to enable support for cluster resources. The default valueis No. You must be running the MSCS or VCS to specify /clusternode:Yes.This option must be specified when using the INSTALL command in acluster environment. This option must also be specified when using theUPDATE command to modify the cluster settings (/clusternode,/clustername).This option can also be specified when using the UPDATEPW command ina cluster environment. Normally this is not required. However, if morethan one scheduler service with different cluster settings are defined for aChapter 10. Client Service Configuration Utility 259