Installation and User's Guide

||||||||||||||||||||||Tip: See the NetApp documentation for details on exporting the NetAppvolumes for use with Windows.v Map the NetApp volumes using CIFS.v Ensure the NetApp volumes have the NTFS security setting3. Set the user ID, and password on Tivoli Storage Manager client for the user IDthat you created in step 1 on page 64 using the following steps:a. Log on as the user with read/write access to the CIFS share.b. From the Tivoli Storage Manager client command line, enter the followingcommand:dsmc set password –type=filer my_file_server snapdiff_user newPasswordSubstitute the following values:my_file_serverThis value is the fully qualified hostname of your NetApp fileserver.snapdiff_userThis value is the user ID that you created in step 1 on page 64.newPasswordThis value is the password for the user ID that you created in step 1on page 64.Related reference“Snapdiff” on page 464“Createnewbase” on page 330Register your workstation with a serverBefore you can use Tivoli Storage Manager, you must set up a node name andpassword and your node must be registered with the server.The process of setting up a node name and password is called registration. Thereare two types of registration: open and closed.Your Tivoli Storage Manager administrator chooses the type of registration foryour site.If you plan to use a Web client, you must have an administrative user ID withsystem privilege, policy privilege, client access authority, or client owner authority.When a new node is registered, an administrative user ID is automatically createdfor the node. By default, this node has client owner authority.Closed registrationWith closed registration, a Tivoli Storage Manager administrator must register yourworkstation as a client node with the server. If your enterprise uses closedregistration, you must provide some information to your Tivoli Storage Manageradministrator.You must provide the following items to your Tivoli Storage Manageradministrator:v Your node name (the value returned by the hostname command, the name ofyour workstation, or the node name you specified with the nodename option). Ifyou do not specify a node name with the nodename option, the default login IDis the name that the hostname command returns.Chapter 2. Configure the Tivoli Storage Manager client 65