Installation and User's Guide

Use the VCS Configuration Editor to configure the registry replication resource,as follows:1. Open the VCS Configuration Editor. You are prompted with the Build a newconfiguration or modify existing configuration window which provides thefollowing options: New Config - If you select this option you are prompted forthe path for the types.cf file, and Open Existing Config - If you select thisoption, the configuration window opens. Click on RESOURCE GROUP youwant to modify.2. Click on the Edit button and select Add resource. The Add Resource windowopens.3. Enter the name you want to give the resource in Resource Name field.4. Select the Resource Type as RegRep. The attributes of the RegRep resourcetype appear.5. Click the Edit button to modify the resource attributes.6. Select the MountResName attribute and enter the shared disk on which youwant to store the registry keys.7. When you are finished, close the window. The Configuration window promptsyou whether to save the configuration; click Yes.Repeat this procedure for each cluster group managed by Tivoli Storage Manager.The new scheduler service is now associated with the cluster group. If the group ismoved (failed) to the other nodes in the cluster, the service should correctly failover between the cluster nodes and notify both cluster nodes of automaticpassword changes.Note: If you manually change the Tivoli Storage Manager password, you muststop the scheduler service, regenerate the password, and restart the schedulerservice. The password can be generated by running the command:dsmc query session -optfile="q:\tsm\dsm.opt"Configure the Web client in a cluster environmentTo use the Web client in a cluster environment, you must configure thebackup-archive client GUI to run in a cluster environment.See “Install the backup-archive client on the cluster nodes” on page 48 for detailedinformation about installing and configuring the backup-archive client in a MSCSor VCS environment.Configure the Web client to process cluster disk resourcesAfter installing and configuring the backup-archive client in a MSCS or VCSenvironment, there are some steps you must perform to process cluster diskresources.Step 1: Identify the cluster groups to manage:First you must identify the cluster groups to be managed.Perform the steps under Step 1 of “Configure the backup-archive client to processcluster disk resources” on page 49.Step 2: Configure the client options file:Now you must configure the client options file.54 IBM Tivoli Storage Manager for Windows Backup-Archive Clients: Installation and User's Guide