Installation and User's Guide

Setup Executable",0x0000000144. [IBM.TIVOLISTORAGEMANAGER]45. "IBM Tivoli Storage Manager"Line 7:Distinguishes this ASR file from one created by other backup products,such as NTBackup.Line 29:In the [COMMANDS] stanza, Tivoli Storage Manager tells ASR to executetsmasr.cmd.Lines 41-44:In the [INSTALLFILES] stanza, Tivoli Storage Manager tells ASR the sourceand destination of files to be copied during text mode setup. The"TSMASR" and "TSMCLI" entries are the volume labels of the removablemedia for the source files. The \Device\ entries specify where ASR looksfor the removable media (floppy or DVD). The next two entries on eachline specify the source and destination of the copy. Next is a commentdescribing the entry. Finally, there is a flag value. 0x00000001 means thatASR always prompts for the media to be mounted. 0x00000000 means donot prompt.Lines 45-46:This is a vendor-provided stanza reserved for Tivoli Storage Manager use.Currently, Tivoli Storage Manager does not exploit this stanza area.TSMASR.CMDThe following example of the tsmasr.cmd file is from a Windows XP workstation.The line numbers are for reference in this discussion and are not part of the actualfile.1. @start "IBM Tivoli Storage Manager" /MIN cmd.exe2. @echo off3. @title IBM Tivoli Storage Manager4. %SystemRoot%\temp\tsmcli.exe -s -e setup.exe -a /s/v"INSTALLDIR=\"%SystemRoot%\temp\~tsmasr\" ADDLOCAL=\"Client\"TRANSFORM=\"C:\tsm_images\TSM_BA_CLIENT\1033.mst\" /qn /l*v\"C:\WINDOWS\repair\tsmasrsetup.log\" RebootYesNo=\"No\" REBOOT=\"Suppress\"ALLUSERS=1 "5. %SystemRoot%\temp\waitforevent.exe 6006. REM Diagnostics7. REM pause8. pushd %SystemRoot%\temp\~tsmasr\baclient9. copy %SystemRoot%\temp\tsmasr.opt >nul10. @echo Do you wish to perform Automated Service Recovery (ASR) restore from the TSMserver or from a local backup set (from file or tape)?11. @echo 1. Restore from the TSM server.12. @echo 2. Restore from a local backup set (from file).13. @echo 3. Restore from a local backup set (from tape).14. :choice15. set /P CH=16. if /I "%CH%"=="1" goto NETWORK17. if /I "%CH%"=="2" goto BACKUPSET_FILE18. if /I "%CH%"=="3" goto BACKUPSET_TAPE19. goto choice20. :NETWORK21. dsmc restore \\DILEXP\C$\ C:\ -subdir=yes -preservepath=complete -replace=all -tapeprompt=no -nodename=DILEXPNEW -optfile=tsmasr.opt22. dsmc restore systemobject -asrmode=yes -nodename=DILEXPNEW -computername=DILEXP -optfile=tsmasr.opt23. REM DiagnosticsChapter 11. Windows XP and Windows Server 2003 ASR supplemental information (Windows) 269