Installation and User's Guide

Table 37. TCP/IP options (continued)OptionDescriptiontcpserveraddress“Tcpserveraddress” on page492tcpwindowsize“Tcpwindowsize” on page 493webports “Webports” on page517Specifies the TCP/IP address for a Tivoli Storage Managerserver.Specifies the size, in kilobytes, of the TCP/IP slidingwindow for your client node.Enables the use of the Web client outside a firewall byspecifying the TCP/IP port number used by the ClientAcceptor service and the Web Client Agent service forcommunications with the Web GUI.Named Pipes optionThis topic provides information about the namedpipename communication option.Table 38. Named Pipes communication optionOptionDescriptionnamedpipename“Namedpipename” on page417Specifies the name of a named pipe to use forcommunications between a Tivoli Storage Manager clientand server on the same Windows server domain.Shared memory optionsThis topic provides information on the shared memory options that you can use.Table 39. Shared memory communication optionsOptionDescriptionlanfreeshmport“Lanfreeshmport” on page406lanfreeshmport “Shmport” onpage 460Specifies the unique number that is used by the client andthe storage agent to identify shared memory area used forcommunications.Specifies the unique number that is used by the client andthe server to identify shared memory area used forcommunications.Server and node optionsAuthorized UserThis topic provides information about the server to contact for backup-archiveservices, and the client node to request backup-archive services.Table 40. Server and node optionsOptionDescriptionasnodename “Asnodename”on page 303nasnodename“Nasnodename” on page 417nodename “Nodename” onpage 419Use the asnodename option to allow agent nodes to back upor restore data on behalf of another node (the target node).This enables concurrent operations from multiple nodes tostore data to the same target node and file space in parallel.Specifies the node name for the NAS file server whenprocessing NAS file systems.Use the nodename option in your dsm.sys file to identifyyour workstation to the server to establish communications.Chapter 12. Processing options 275