Installation and User's Guide

have access to all files and directories in and below the root directory. The first\* gives access to all directories and all files in the root directory. The second\* allows access to all directories and files below the root directory.Note:1. Use the file space name if the drive label name has changed.2. If you include filespacename, do not include a drive letter in the filespecification.For example:v Your directory structure is multilevel: d:\test\sub1\subsub1.v The d:\test directory contains the h1.txt and h2.txt files.v The d:\test\sub1 directory contains file s1.htm.v The d:\test\sub1\sub2 directory contains the ss1.cpp file.To allow access to all files in the d:\test\sub1\sub2 directory, enter:set access backup d:\test\sub1\sub2\* * *To allow access to only those files in the d:\test directory, enter:set access backup d:\test\* * *To allow access to all files in all directories in and below the d:\test directory,enter:set access backup d:\test\* * *set access backup d:\test\*\* * *{filespacename}Specifies the file space name (enclosed in braces) on the server that containsthe files to which you are giving access. This name is the drive label name onthe workstation drive from which the file was backed up or archived. Use thefile space name if the drive label name has changed.image-fsThe name of the image file system to be shared. This can be specified as anasterisk (*) to allow access to all images owned by the user granting access.nodeSpecifies the client node of the user to whom you are giving access. Usewildcards to give access to more than one node with similar node names. Usean asterisk (*) to give access to all nodes.userThis is an optional parameter that restricts access to the named user at thespecified node. This parameter is applicable for UNIX clients only. Windowsclients can omit this parameter. If this parameter is specified on a Windowsclient, it is ignored.ExamplesTaskTaskGive the user at node_2 authority to restore all files with an extension of.c from the c:\devel\proja directory.Command: set access backup c:\devel\proja\*.c node_2Give the user at node_3 authority to retrieve all files in the c:\develdirectory, but do not permit access to files in subdirectories of c:\devel,such as c:\devel\proj.Command: set access archive c:\devel\* node_3Chapter 13. Using commands 659