Volume-IF - JantERmantER

DCPL-K4A02
VOLUME: II-D/2
SECTION-I
TECHNICAL SPECIFICATION
FOR
AREA GRADING
1.0.0 SCOPE
This specification shall govern all clearing, grubbing, excavating, area filling,
grading and compacting soils for areas designated on the drawings. The
work shall include clearing and grubbing, stripping and storage of top soil,
excavation, blasting (if required), hauling, dumping and spreading of soil,
undercutting to remove unstable soil areas, compacting existing soil
surfaces and bottom of excavated areas to receive fills, compacting
excavated areas for subgrade, placing and compacting soils in fills,
dealing with surface water, pumping to keep excavated areas and areas
to be filled dry, final grading of designated areas, disposing of unsuitable
and excess excavated materials and incidentals thereof.
2.0.0 GENERAL
2.1.0 Work to be provided for by the Contractor
The work to be provided for by the Contractor, unless specified otherwise,
shall include but not be limited to the following :
a) Furnish all labour, supervision, services, earth-moving
machineries and equipment, compaction plant and equipment,
tools and plants, survey instruments, transportation etc. required
for the work.
b) Prepare and submit working drawings showing the approaches,
slopes, berms, sumps for dewatering, space for temporary
stacking of spoils, disposal area, borrow pits, fencing etc. and all
other details as may be required by the Engineer.
c) To carry out and submit to the Engineer, results of soil
compaction tests whenever required by the Engineer to assess the
degree of compaction.
d) If blasting is resorted to, necessary licenses to be procured from the
proper authorities.
2.2.0 Work to be provided for by others
No work under this specification will be provided by any agency other than
the Contractor unless specifically mentioned elsewhere in the Contract.
2.3.0 Codes and Standards
(PCA.774.S034sca) V.II-D2/S-I : 1