Volume-IF - JantERmantER

TITLE SPECIFICATION NO. PES-509-02A
LIGHTNING PROTECTION &EARTHING
OF CHIMNEY
(SUPPLY & INSTALLATION)
VOLUME
II B
SECTION
D
REV NO. 0 DATE 08.02.2002
SHEET 3 OF 4
demonstrate that the equipm ent shall co mply with the requirem ents of this
specification.
5.2.2 The tolerance in dimensions shall be in accordance with appropriate Indian Standards.
5.2.3 Forged steel below 10mm thick is subject to Magnetic Particle Testing.
6.0 DRAWINGS, DATA & DOCUMENTS
6.1 Data sheet-A of this specification gives th e details of m aterials to be used for the
Lightning Protection system for Chimney.
6.2 The tenderer shall subm it his design(s) a nd drawings for Dir ect stroke Lightning
Protection System of Chimneys for purchaser’s evaluation/scrutiny and approval.
6.3 The contractor shall furnish his design(s) and installation drawings for approval.
6.4 The contractor shall furnish the requisite num ber of prints & RTF’s of all drawings as
specified elsewhere in this specification.
6.5 The site modifications/deviations shall be m arked on the latest revision of the drawings
& submitted as ‘As Built’ drawings to the purchaser after completion of installation.
6.6 Tenderer shall submit all filled up schedules as per Volume-III.
6.7 The tenderer shall subm it reports on Type tests & Special tests conducted on lightning
protection materials & accessories.
7.0 COMPLETENESS
7.1 The offer for supply and erection shall be co mplete in all respects & shall include all
materials, tools and appliances, whether speci fied or not, required for the com pletion of
the job.
7.2 Supply/arrangements of all accessories and material etc. shall be the responsibility of the
contractor.