Volume-IF - JantERmantER

DCPL-K4A02
VOLUME : II-D/2
SECTION-XII
TECHNICAL SPECIFICATION
FOR
CARPENTRY & JOINERY
1.0 SCOPE
This shall include supply, fitting and fixing of timber frames to doors and
windows with M S holdfasts, paneled or flush doors, windows, shutters,
partitions, wall paneling, pelmets, shelves, furniture, etc. as shown in drawings,
including a prime coat of approved paint, varnish, or fixing of decorative plastic
laminate. This shall also include the supply and fixing of all hardware and
fixtures shown in drawing.
2.0 INSTALLATION
2.1 Materials
a) Timber
Unless otherwise specified, all timber shall be best quality well
seasoned C P teakwood free from large or loose, knots cracks or other
defects. Where specified, timber shall be treated with approved wood
preservative before use. Before starting the carpenters work, the
Tenderer shall have the rough timber approved by the Engineer.
b) Plywood
Plywood shall be commercial quality with decorative surface veneer.
Unless specifically permitted otherwise, the adhesive used in plywood
shall be phenol-formaldehyde resin of B W R grade conforming to
IS:848.
c) Decorative Laminated Plastic Sheets
The colour, pattern, finish and texture shall be approved by the
Engineer and the bulk supply procured in sheet sizes which will ensure
the least number or joints in one surface.
d) Flush Doors
(PCA.775.S034sc12) V.II-D2/S-XII : 1