Volume-IF - JantERmantER

TITLE:
SCOPE OF WORK
SPECIFICATION NO. PE-TS-360-620-C001
VOLUME - II B
SECTION - A
REV.NO. 0 DATE 18.09.2010
SHEET
OF
1.1.3 The scope unde r t his spe cification covers t he c onstruction of Single flue
Reinforced Concrete Chimney including providing all labour,
supervision, materials, scaffolding, power, fuel, construction equipments, tools
and plants, supplies, transportation, storage, insurance and all incidental items
not he rein s pecifically m entioned but r easonably i mplied or w hich m ay be
found necessary for successful completion of the work including c ontractor's,
and where necessary manufacturer's expert supervision in strict compliance with
the requirements of this specification and approved construction drawings. The
tendered amount shall be for the chimney to be completed in all respect as per
this specification for the purpose required.
1.1.4 The suc cessful t enderer sha ll ha ve t o prepare ba r be nding schedule & s chedule of
embedments and get the same approved by t he Engineer. T he detailed fabrication
drawings for doors, flue ducts, ladders, M.S. staircases, hand rails and other fixtures
shall also be prepared by the successful tenderer and got approved from the Engineer
before undertaking the actual fabrication or erection of construction.
1.1.5 The contractor shall prepare, at his own cost, the detailed working drawings showing
all details of the formwork staging (adequacy to be supported by design calculations)
and other arrangements for the concreting work and submit six copies of the same for
the a pproval of t he E ngineer-in-Charge / consultants a nd onl y on t he receipt of the
approval of the consultants the work shall be taken up.
1.1.6 The contractor shall prepare, at his own cost, the detailed working drawings showing
all Electrical details and Elevator details.
2.0.0 TENDER DRAWINGS
2.1.1 The f ollowing dr awing w hich f orms pa rt of T ender D ocuments are indicative and
give ove rall di mensions, a nd s ome ot her typical de tails of t he w ork r equired t o be
done under this contract. The accessories shown in the drawings are also indicative :
S. NO. DRG. NO. TITLE
1. PE-DG-360-620-C001 GENERAL ARRANGE MENT OF
CHIMNEY.
2.1.2 The drawings and specifications furnished are to be considered as explanatory of each
other. S hould anything a ppear in one drawing that is not described in the other, no
advantage s hall be t aken of s uch om ission. S hould a ny di screpancies, how ever,
appear, or should any misunderstanding of drawings or as to the dimensions or quality
of the materials or the due a nd i mproper e xecution of t he w orks or a s t o t he
measurements or quality or valuation of the works executed under this contract or as