Volume-IF - JantERmantER

DCPL-K4A02
g) Prepare and furnish detailed Bill of Materials, Drawing Office
Despatch lists, Bolt List and any other list of bought out items
required in connection with the fabrication and erection of the
structural steelwork.
h) Insure, load and transport all fabricated steelwork field connection
materials to site.
2.2.0 Work by others
No work under this specification will be provided for by any agency other
than the contractor, unless specifically mentioned otherwise elsewhere in
the contract.
2.3.0 Codes and standards
All work under this specification shall, unless otherwise specified in the
contract, conform to the requirements of the latest revision and/or
replacements of the following or any other relevant Indian Standard
specifications and codes of practice. In case any particular aspect of the
work is not specifically covered by any Indian Standard Specification, any
other standard practice, as may be specified by the Engineer shall be
followed:-
LIST OF I.S. CODES -
IS Codes
RELEVANT TO FABRICATION OF
STRUCTURAL STEEL WORK
Description
IS : 800 - Code of practice for general construction in steel.
IS : 801 - Code of practice for use of cold formed light gauge
steel structural members in general building
construction.
IS : 806 - Code of practice for use of steel tubes in general
building construction.
IS : 808 - Dimensions for rolled steel beams, channels and angle
sections.
IS : 812 - Glossary of terms relating to welding & cutting of
metals.
IS : 813 - Scheme of symbols for welding.
IS : 814 - Covered electrodes for metal arc welding of carbon and
carbon manganese steel.
IS : 815 - Classification coding of covered electrodes
for metal arc welding of mild steel and low
alloy high tensile steel.
(PCA.774.S034sca4) V.II-D2/S-IV : 2