Volume-IF - JantERmantER

DCPL·K9A01
15:4687 Gland packing asbestos.
15:4832 Chemical Resistant mortars.
15:4860 Acid-reslstant bricks.
15:4990 Plywood for concrete shuttering wolll.
15:4998 Criterte for design of reinforced concrete chimneys.
(Part·Q
15:5410 Cement paint, colour as required.
15:5445 Long ftuted machine reemers with Morse taper shanks.
15:5495 Sizes and shapes for firebrick (300 mm. and higher series).
15:6911 stainless Steel plate, sheet and strip.
15:8f12 High slrength ordinary portland cement.
15:8183 Bonded Mineral Wool.
15:9595 Recommendation for Metal Arc Welding of Carbon and
Carbon Manganese steels.
CP326·
British Standard • Protection of structures against lightning.
NEPA NO. 78 Code of protection against lightning.
The Indian Electricity Rules.
The,requirements of Department of CMI Aviation, Gov!. of India.
2.4.0 Con(ormlty with Drawings and Spedficatlons
. . . .
The Contractor Shalfcarry oUt' ali the weill h strict lICCoRlance 'willi the drawings
Stamped "Released for Construction" and'speCification Issued to him and as per
Conlradg~s detailed drawings approved by the Consulting Engineer. Prior to
concreting, the Contractor shall prepare a check list on a set format of all items of
wolll involved, and lnform the Engineer well in advance so that the Engineer
shail have the opportunity of satisfying himself if the works mentioned in the
fom1at are dOne according to drawings and specification, and he can allow the
Contractor in writing to start pouring of concrete. The entire operation of
concreting shall be can1ed on as per specification, to the complete sa6sfaction of
the Engineer. fIIOde'IIation from the drawings wUl be allowed unless otherwise
directed by the Engineer In writing.
For Load Bearing Thennal Insulation block assembly and lateral ,estralnt
InsUlation block assembly, Contractor shall design sizes of all components of the
(PCA.CI).OO3.S905CSA24.4oc.doc) V.U-02JS.XXIV: 6
"
".: " .