Volume-IF - JantERmantER

DCPL-K4A02
All work under this specification, unless specified otherwise, shall
conform to the latest revision and/or replacements of the following or any
other relevant Indian Standard Specifications and Codes of Practice. In
case any particular aspect of work is not covered specifically by Indian
Standard Specification any other standard practice as may be specified by
the Engineer shall be followed :
IS : 1200 : Method of Measurement of Building and Civil
Engineering work, Part-I Earthwork
IS : 2720 : Determination of Moisture Content
(Part-II)
IS : 2720 : Grain Size Analysis
(Part-IV)
IS : 2720 : Determination of Moisture Content/Dry
(Part-VII)
IS : 2720 : Determination of Moisture Content/Dry
(Part-VIII)
IS : 2720 : Determination of Density Index (Relative
(Part-XIV)
IS : 2720 : Determination of Dry Density, in place,
(Part-XXIV)
IS : 2720 : Determination of Dry Density of Soils,
(Part-XXVIII)
IS : 3764 : Safety Code for Excavation Work
IS : 4081 : Blasting and related drilling operations
IRC : SP-11 : Hand book of quality control for construction of roads
and runways
IRC : 36 : Construction of Earth Embankments for Road Work
2.4.0 Conformity with Designs
The Contractor shall carry out the work as per the drawings issued to him
and/or Contractor's drawings which are approved by the Engineer and/or
the Engineer's instructions.
2.5.0 Materials to be used
(PCA.774.S034sca) V.II-D2/S-I : 2