Volume-IF - JantERmantER

DCPL-K4A02
IS : 816 - Code of practice for use of metal arc welding
for general construction in mild steel.
IS : 817 - Code of practice for training & testing metal
arc welders.
IS : 818 - Code of practice for safety and health
requirements in electric and gas welding and
cutting operations.
IS : 819 - Code of practice for resistance spot welding
for light assemblies in mild steel.
IS : 822 - Code of practice for inspection of welds.
IS : 919 - Recommendations for limits and fits for engineering.
(Part - 1&2)
IS : 1161 - Steel Tubes for structural purposes.
IS : 1182 - Recommended practice for Radiographic Examination
of fushion welded butt joints in steel plates.
IS : 1200 - Method of measurement of steel work and iron work
(Part - 8)
IS : 1239 - Mild steel tubes, tubulars and other wrought steel
(Part - 1&2) fittings
IS : 1363 - Hexagon head bolts, screws and nuts of product
(Part - 1 to 3) grade C.
IS : 1364 - Hexagon head bolts, screws and nuts of product
(Part - 1 to 5) grade A & B.
IS : 1365 - Slotted counter sunk head screws (dia. 1.6 to 20 mm)
IS : 1367 - Technical supply conditions for threaded steel
(Part - 1 to 18) fasteners.
IS : 1608 - Method for tensile testing of steel products.
IS : 1730 - Dimensions for steel plate, sheet and strip for structural
and general engineering purposes.
(PCA.774.S034sca4) V.II-D2/S-IV : 3