Volume-IF - JantERmantER

DCPL-K4A02
VOLUME : II-D/2
SECTION-III
TECHNICAL SPECIFICATION
FOR
CEMENT CONCRETE (PLAIN & REINFORCED)
1.0 SCOPE
1.1 General
This specification covers all the requirements, described hereinafter for
general use of Plain and Reinforced Cement Concrete work in Structures
and locations, cast-in-situ or precast, and shall include all incidental items of
work not shown or specified but reasonably implied or necessary for the
completion of the work.
1.2 This specification shall also apply to the extent it has been referred to or
applicable with the special requirements of structures covered in SCOPE of
IS:456.
1.3 IS:456 shall form a part of this specification and shall be complied with
unless permitted otherwise. For any particular aspect not covered by this
Code, appropriate IS Code, specifications and/or replacement by any
International Code of practice as may be specified by the Engineer shall
be followed. All codes and Standards shall conform to its latest revisions. A
list of IS codes and Standards is enclosed hereinafter for reference.
2.0 GENERAL
2.1 Work to be provided for by the Contractor
The work to be provided for by the Contractor, unless
specified shall include but not be limited to the following :-
otherwise
a) Furnish all labour, supervision, services including facilities as may
be required under statutory labour regulations, materials, forms,
templates, supports, scaffolds, approaches, aids, construction
equipment, tools and plants, transportations, etc. required for the
work.
b) Except where it is excluded from the Scope of Contract, Contractor
shall prepare progressively and submit for approval detailed
drawings and Bar Bending Schedules for reinforcement bars showing
the positions and details of spacers, supports, chairs, hangers etc.
c) Design and prepare working drawings of formworks, scaffolds,
supports, etc. and submit for approval.
(PCA.774.S034sca2) V.II-D2/S-III : 1