Volume-IF - JantERmantER

DCPL-K4A02
v) Joint sealing strips and other waterproofing materials.
vi)
vii)
Joint filling compounds.
Foundation quality Rubber Pads.
c) Design Mix
Design mix as per Clauses 2.1 (g) & 3.4 of this specification
giving proportions of the ingredients, sources of aggregates
and cement, along with accompanying test results of trial mixes
as per relevant I.S., is to be submitted to the Engineer for his
approval before it can be used on the works.
d) Detail Drawings and Bar Bending Schedules
Detailed working drawings and Bar Bending Schedules in
accordance with Clause 2.1(b) and 3.16.1 of this specification.
e) Detailed Drawings and Designs of Formworks to be used
Detailed design data and drawings of standard formworks
used as per clause 2.1 (c).
to be
f) Detailed Drawings for Templates & Temporary Supports for
Embedments
As per Clause 2.1 (e).
g) Mill Test Reports for Cement & Reinforcing Steel
h) Inspection Reports
Inspection Reports in respect of Formwork and
Reinforcement and any other item of work as may be desired
by the Engineer in accordance with Clause 2.4 of this specification.
i) Test Reports
Reports of tests of various materials and concrete as required
under Clause 4.0 : SAMPLING & TESTING of this specification.
j) Any other data which may be required as per this
specification.
2.4 Conformity with Design
The Contractor will prepare check lists in approved proforma which will
be called 'Pour Cards'. These Pour Cards will list out all items of work
involved. The Contractor will inform the Engineer, sufficiently in
(PCA.774.S034sca2) V.II-D2/S-III : 4