Volume-IF - JantERmantER

DCPL-K4A02
d) Submit for approval shop drawings for various inserts, anchors,
anchor bolts, pipe sleeves, embedments, hangers, openings,
frames etc.
e) Submit for approval detailed drawings of supports, templates,
hangers, etc. required for installation of various embedments
like inserts, anchor bolts, pipe sleeves, frames, joint seals, frames,
openings etc.
f) Submit for approval detailed schemes of all operations required for
executing the work, e.g. Material handling, Concrete mixing,
Placement of concrete, Compaction, curing, services, Approaches,
etc.
g) Design and submit for approval concrete mix designs required to
be adopted on the job.
h) Furnish samples and submit for approval results of tests of various
properties of the following :
i) The various ingredients of concrete
ii)
iii)
iv)
Concrete
Embedments
Joint seals
i) Provide all incidental items not shown or specified in particular but
reasonably implied or necessary for successful completion of the
work in accordance with the drawings and specifications.
j) For supply of certain materials normally manufactured by specialist
firms, the Contractor may have to produce, if directed by the
Engineer, a guarantee in approved proforma for satisfactory
performance for a reasonable period as may be specified,
binding both the manufacturers and the Contractor, jointly and
severally.
2.2 Work by Others
No work under this specification will be provided by any agency other
than the Contractor unless specifically mentioned elsewhere in the
contract.
2.3 Information to be submitted by the Tenderer
(PCA.774.S034sca2) V.II-D2/S-III : 2