Volume-IF - JantERmantER

.
.
S.
NO.
1
COMPONENT / OPERATION
2
QUALITY PLAN
SHEET 4 O 6
CHARACTE-
RISTICS
CHECK
3
CAT.
4
TYPE/
METHOD O
CHECK
5
CUSTOMER PROJECT SPECIICATION
TITLE
NUMBER
BIDDER / QUALITY PLAN SPECIICATION
VENDOR NUMBER PED-507-00-Q-002 / 02 TIITLE
SYSTEM ITEM PVC POWER & CONTROL CABLE SECTION VOLUME III
EXTENT O
CHECK
6
REERENCE
DOCUMENT
7
ACCEPTANCE
NORM
8
ORMAT O
RECORD
9
AGENCY
P W V
3. LAY LENGTH MA VISUAL, MEAS. -DO- -DO- -DO- -DO- 2 - -
10
ORM No. PEM — 6041-0
REMARKS
11
4. COVERAGE MA MEASUREMENT -DO- -DO- -DO- -DO- 2 - -
5. DIA OVER - MA MEASUREMENT -DO- -DO- -DO- -DO- 2 - -
ARMOURING
2.7 OUTER SHEATH EXTRUSION 1. SURFACE MA VISUAL 100% - FREE FROM BUL- LOG BOOK 2 - -
FINISH GING, BURNT PA-
RTICLES, LUMPS
CUTS & SCRATC-
HES.
2. SHEATH THICK- MA MEASUREMENT SAMPLE IS:5831 & IS:5831 & -DO- 2 - -
NESS IS-1554 IS-1554
DATA SHEET DATA SHEET
3.DIA OVER OUT- MA -DO- -DO- -DO- -DO- -DO- 2 - -
ER SHEATH
4. MARKING MA VISUAL 100% IS:1554 & IS:1554 & TEST REPORT 2 - - SEQUENTIAL MARKING
BHEL SPEC. BHEL SPEC. SHALL BE DONE BY
PRINTING.
2.8 FINISHED CABLE 1. ROUTINE TEST CR ELEC. & MEAS. 100% IS:1554 & IS:1554 & TEST REPORT 2 - 1
BHEL SPEC. BHEL SPEC.
2.TYPE AND FRLS CR ELEC. PHY SAMPLE * -DO-/APPD. DATA -DO-/APPD.DATA -DO- 2 - 1 *ONE DRUM / SIZE / LOT
TESTS & MEAS SHEET. SHEET.
3.0 FINAL INSPECTION 1. FINISH & MA VISUAL (SEE REMARK ) BHEL SPEC. FREE FROM -DO- 2 1 - ONE DRUM EACH FOR
LENGTH IS: 1554 BULGING,BURNT POWER AND CONTROL
PARTICLES LUMPS CABLES IN A LOT
CUTS & SCRATC-
HES.
BHEL PARTICULARS BIDDER / VENDOR
NAME
SIGNATURE
DATE
BIDDER’S / VENDOR’S COMPANY SEAL