Volume-IF - JantERmantER

TITLE:
SPECIFIC TECHNICAL
REQUIREMENTS FOR
ELECTRICAL WORKS
layout and matching.
SPECIFICATION NO. PE-TS-360-620-C001
VOLUME - II B
SECTION - C SUB SECTION: II
REV.NO. 0 DATE: 18.09.2010
SHEET 6 OF 6
4.00 OTHER REQUIREMENTS
4.01 In case of any deviation the bidder shall indicate the same clause by clause in
enclosed deviation schedule. In the absence of duly filled in schedules, it will
be construed that the offer confirms strictly to the specification.
4.02 Bidder shall furnish duly filled in data sheets (enclosed with specification) for
electrical equipments after the award of contract for approval. Technical data
sheet of any other electrical equipment if required by the purchaser shall be
furnished to the contractor after award of contract to enable them to furnish
the same.
4.03 The bidder shall furnish signed and stamped copy of the specification as a
token of acceptance and submit the same along with the technical offer.
Further, Quality plan shall be subject to BHEL/customer/consultant approval
after award of contract without any commercial or delivery implication.
Inspection shall be carried out as per approved Quality Plan approved during
detailed engineering.
4.04 Bidder shall furnish details of aviation obstruction lights with catalogues.
4.05 Bidder shall furnish all drawings/data/catalogues as indicated in different
electrical equipment specifications along with the offer in sufficient nos. as
indicated in the civil part of the specification.
4.06 The minimum illumination level shall be provided as indicated below :
- Ground Floor, platforms, stairs & landings 50 LUX
- Area of different distribution boards 150 LUX
4.07 In case of any conflict between various sections of the specification, decision
of the Purchaser shall be final and binding on the bidder.