Volume-IF - JantERmantER

4.6.0 Insulations
DCPL-K9A01
The Insulating materials shall be tested for its stipulated characteristics and
properties In accordance with the latest editions of IS:3144 and IS:3346
andlor as directed by the Engineer.
('
5.0.0 INFORMATION TO BE SUBMllTED
5.1.0 WlthTender
.~
a)
The following technical Information are required with the tender.
Source and arrangement of processing of aggregates proposed to be
adopted.
b) Type of plant and equipment proposed to be used.
c) Names of firms with which association is sought for to execute the
special Hems of work e.g. nue expansion dlmpensator, load bearing
insulation blocks etc. in the contract. .
d) Types of formwork proposed to be used. All details as per clause no.
3.03.!l6 to be submitted, if slip form method is proposed to be used.
.
-~ e) Shop proposed for fabrication of steel (Rue) liners. Detailed write-up
on procedure of-erection of complete liner system including details of
equipment proposed for the same.
f) For insulating material tests to be offered for inspection & tests for
which test certifICates will be submitted. A drawing showing the
( details of fixing insulation on the nues at bearings, lateral restraints
,
and exterior surface.
(
g) Proposal for lifting of men and material in constructing the chimney.
5.2.0 After Award
.The f