Volume-IF - JantERmantER

DCPL-K4A02
2.4.0 Strength
2.5.0 Surface Finish
2.6.0 Skirting
2.7.0 Installation
Each 600 mm x 600 mm floor panel must be capable of supporting an
uniform minimum live load of 1220 Kg/Sq.M or a concentrated minimum load
of 450 Kg. applied through a phenolic caster 75 mm in diameter and 45 mm
wide, or a rolling minimum load of 450 Kg. at any point with a maximum
deflection of 2 mm. The ultimate strength shall be capable of carrying a 2300
Kg. axial load without deformation of any part.
All removable panels shall have the top surface finished with 2 mm thick
Antiatatic Vinyl Flooring bonded to the surface with adhesive as per
manufacturer’s specification.
Skirting shall be of the same Anstistatic Vinyltiles, 150 mm. high and 2 mm.
thick, completely matching with the false flooring surface and shall be fixed
with the plastered wall surface as per manufacturer’s specification.
All steel surface are to be protected by pointing over a primer as per
schedule of items and any damage to the paint during installation shall be
made good. Finished floor surface, when specified by the Engineer-in-
Charge shall be protected by the Contractor with kraft paper taped and
sealed at edges to prevent tearing.
Any damage to the sub floor during installation of the false flooring system
shall be made good by the Contractor without to the owner.
3.0.0 ACCEPTANCE CRITERIA
The false flooring system shall be checked specially for :
a) Level
b) Alignment of joints
c) Thickness of joints
d) Surface finish
e) Colour and texture
(PCA.775.S034sc11) V.II-D2/S-XI : 2