Volume-IF - JantERmantER

j
{
f.
\
DCPl-K9A01
VOLUME: II-Dj2
SECTION-XXIV
TECHNICAL SPECIFICATION
FOR
REINFORCED CONCRETE MULTIFLUE STACK
1,0.0 SCOPE
{ This specification covers plain and reinforced cement concrete work, steel
,
flues and Insulation work. painting and protective treatment work, connected
wIIh construction of RCC MuItif\ue Slack.
2.0.0 GENERAl
2,1.0 Work to be provided for by the Contractor
Work to be provided by the Contractor, unless speCified otherwise, shall
include but shall !lot be limited to the following :
t
'.
a) Furnish all labour, supervision, services, Insurance, material, power,
fuel forms, templates, supports, scaffolding, tools, plants, construction
equipment, approaches, transportation etc.' required for the entire
work.
b) Design and prepare working dniwings for formworks, scaffoldings.
suPPQl1s, staging,hoisting arrangement for men and material etc. and
submlt them'for approval.
t c) Prepare and submit for approval, as per approved schedule, detailell
'J
drawings for RCC work In shell, platforms at various levels, roof and
ground floor arid bending schedules for reinforcement bars, showing
the positions and details' of spacers, chairs,' supports, hangers.
openings etc, ',.. ' " " "
t
{
,(:~.
C'
(
d) Prepare detailed fabrication and erection marking drawings for steel
flues including flue expansion compensators, steel flue supports and
restraint arrangements along wIIh fittings and aocessories and sIJhm['
them for approval.
e) Prepare and submit for approval detailed shop drawings, with list of
materials and material specifICations for load Bearing Insulation
Blocl(Sjji'ld Lateral Restraint Insulation Blocks,
(PCAC[)'o03.se05CSA24.doc.doc) V.II-02JS.XXIV: 1
309