Volume-IF - JantERmantER

DCPL-K4A02
PAINTING
IS : 117 - Specification for ready mixed paint, brushing, finishing,
exterior, semi-gloss, for general purposes.
IS : 128 - Specification for ready mixed paint, brushing, finishing,
semi-gloss for general purposes, black.
IS : 1477 - Code of practice for painting of ferrons metal
(Part - I & II) in building.
IS : 2074 - Ready mixed paint, air-drying red-oxide zinc chrome
priming.
IS : 2339 - Specification for aluminium paints for general purposes
in dual container.
IS : 2932 - Specification for enamel, synthetic exterior type - I.
IS : 2933 - Specification for enamel, synthetic exterior type - II.
2.4.0 Conformity with Designs
The contractor shall design all connections, supply and fabricate all
steelwork and furnish all connection materials in accordance with the
approved drawings and/or as instructed by the Engineer keeping in view
the maximum utilization of the available sizes and sections of steel
materials. The methods of painting, marking, packing and delivery of all
fabricated materials shall be in accordance with the provisions of the
contract and/or as approved by the Engineer. Provision of all relevant Indian
Standard Specifications and Codes of Practice shall be followed unless
otherwise specified in the contract.
2.5.0 Materials to be used
2.5.1 General
All steel materials shall be free from all imperfections, mill scales, slag
intrusions, laminations, pittings, rusts etc. that may impair their strength,
durability and appearance. All materials shall be of tested quality only unless
otherwise permitted by the Engineer and/or Consultant. If desired by the
Engineer, Test Certificates of materials supplied by the contractor in
respect of each consignment shall be submitted in triplicate. Whenever the
materials are required to be used from unidentified stocks, if permitted by
the Engineer, a random sample shall be tested at an approved laboratory
from each lot of 50 tonnes or less of any particular section.
(PCA.774.S034sca4) V.II-D2/S-IV : 5