Volume-IF - JantERmantER

DCPL-K4A02
2.3.1 With Tender
2.3.2 After Award
The following technical information are required with the tender :
a) Source and arrangement of processing of aggregates proposed to be
adopted.
b) Type of plant and equipment proposed to be used.
c) Names of firms, if any, with which association is sought for to
execute the special items of work in the contract.
d) Types of formwork proposed to be used.
The following information and data including samples where necessary,
shall be submitted by the Contractor progressively during the execution of the
contract.
a) Programme of Execution and Requirement of Materials
The Contractor will submit a Master Programme for completion of
the work giving monthwise requirements of materials for the
procurement.
This Master Programme may have to be reviewed and updated
by the Contractor, quarterly or at more frequent intervals as may be
directed by the Engineer depending on the exigencies of the work.
Detailed day to day programme of every month is to be submitted
by the Contractor before the end of the previous month.
b) Samples
Samples of the following materials and any other materials
proposed to be used, shall be submitted as directed by the
Engineer, in sufficient quantities for approval. Approved samples
will be preserved by the Engineer for future reference. The
approval of the Engineer shall not, in any way, relieve the
Contractor of his responsibility of supplying materials of specified
qualities :
i) Coarse and fine aggregates.
ii)
iii)
Admixtures.
Plywood for Formwork.
iv) Embedded and anchorage materials as may be desired by
the Engineer.
(PCA.774.S034sca2) V.II-D2/S-III : 3