Volume-IF - JantERmantER

DCPL-K4A02
chemicals normally encountered in service. The physical properties
will be generally as follows. The actual requirements may be
slightly different as decided by the Engineer :
Specific Gravity : 1.1 to 1.15
Shore Hardness : 65A to 75A
Tensile Strength : 25 - 30 N/Sq.mm
Maximum Safe
Continuous
Temperature : 75 Deg.C
Ultimate Elongation : Not less than 350%
b) P.V.C. Sealing Strips
The minimum thickness of P.V.C. sealing strips will be 3 mm and
the minimum width 100 mm. The actual size and shape will be as
shown in drawings/schedule of items and/or as directed by the
Engineer. The material should be of good quality Polyvinyl
Chloride highly resistant to tearing, abrasion and corrosion as
well as to chemicals likely to come in contact with during use.
The physical properties will generally be as follows. The actual
requirements, which will be directed by the Engineer, may vary
slightly :
Specific Gravity : 1.3 to 1.35
Shore Hardness : 60A to 80A
Tensile Strength : 10 - 15 N/Sq.mm
Maximum Safe
Continuous
Temperature : 70 Deg.C
Ultimate Elongation : Not less than 275%
(PCA.774.S034sca3) V.II-D2/S-III : 37