Volume-IF - JantERmantER

DCPL-K4A02
Quality Plan.
2.7.0 Information regarding Site Conditions
Boring and sub-surface data regarding the nature of soil, rock, sub-soil
water etc. shown on drawings or otherwise furnished to the Contractor
shall be taken as a guidance only and variation therefrom shall not affect
the terms of the Contract. The Contractor must satisfy himself regarding
the character and volume of all work under this contract and expected
surface, sub-surface and/or sub-soil water to be encountered. He must
also satisfy himself about the general conditions of site and ascertain the
existing and future construction likely to come up during the execution of
the Contract so that he may evolve a realistic programme of execution.
3.0.0 EXECUTION
3.1.0 General
The work shall be undertaken in accordance with the lines,
levels,grades and details shown on the drawings, specification and the
approved method of work.
The works shall be carried out in a workman like manner without
endengering the safety of nearby structures, roads, railway tracks,
cable, pipelines, etc. and without causing hindrance to construction
activities.
Suitable approaches, fencing, area lighting and temporary works required
for the works shall be provided by the contractor. Sturdy and elegent
fencing is to be provided around the top edge of the exavation as well as
the bottom of the fill at the surplus disposal area where damping from a
high bench is in progress, if directed by the Engineer. Adequate area
lighting shall be provided by the contractor, if night work is undertaken.
The Contractor shall submit a proposal covering the proposed
excavation and placement of fill material for approval of the Engineer.
The proposal shall include but not be limited to the following.
a) Mobilisation and demobilisation of plant
b) Proposed plant and equipment, labour resources & supervision.
c) Details of proposed method of clearing and grubbing for each area of
cut and fill.
d) Drawings showing the areas for placement of material.
e) Management of excavation and filling works i.e., control of setting out,
testing procedures, handling, temporary stockpiles, etc.
f) Temporary works proposals
(PCA.774.S034sca) V.II-D2/S-I : 4