Online proceedings - EDA Publishing Association

REFERENCES
[1] G. Mehta, J. Lee, W. Cha, Y.-C. Tung, J.J. Linderman and S.
Takayama, “Hard top soft bottom microfluidic devices for cell
culture and chemical analysis”, Analytical Chemistry, 81(10),
2009, 3714-3722.
[2] H. Lee, E. Sun, D. Ham and R. Weissleder, “Chip-NMR biosensor
for detection and molecular analysis of cells”, Nature Medicine,
14(8), 2008.
[3] H. Sugino, K. Ozaki, Y. Shirasaki, T. Arakawa, S. Shoji and T.
Funatsu, “On-chip microfluidic sorting with fluorescence spectrum
detection and multiway separation”, Lab on a Chip, 9, 2009, 1254-
1260.
[4] C.-Y. Lee, G.-B. Lee, J.-L. Lin, F.-C. Huang and C.-S. Liao,
“Integrated microfluidic systems for cell lysis, mixing/pumping
and DNA amplification”, Journal of Micromechanics and
Microengineering, 15, 2005, 1215-1223.
[5] A. Krebs, T. Knoll, D. Nußbaum and T. Velten, “Fabrication of
enclosed SU-8 microchannels for cell handling applications”, Proc.
10th Int. Conf. on Management of Innovative Technologies, Fiesa,
Slovenia, 2009.
[6] D. Nußbaum, D. Herrmann, T. Knoll and T. Velten, “Micromixing
Structures for Lab-on Chip Applications: Fabrication and
Simulation of 90° Zigzag Microchannels in Dry Film Resist”,
Proc. 4M/ICOMM Conference, Karlsruhe, Germany, 2009.
[7] G. Voskerician, M. S. Shive, R. S. Shawgo, H. von Recum, J. M.
Anderson, M. J. Cima and R. Langer, “Biocompatibility and
biofouling of MEMS drug delivery devices”, Biomaterials, 24,
2003, 1959-1967.
[8] G. Kotzar, M. Freas, P. Abel, A. Fleischman, S. Roy, C. Zorman, J.
M. Moran and J. Melzak, “Evaluation of MEMS materials of
construction for implantable medical devices”, Biomaterials, 23,
2002, 2737-2750.
[9] A. Altuna, G. Gabriel, L. M. de la Prida, M. Tijero, A. Guimerá, J.
Berganzo, R. Salido, R. Villa and L. J. Fernández, “SU-8-based
microneedles for in vitro neural applications”, Journal of
Micromechanics and Microengineering, 20, 2010, 064014 (6pp).
[10] L. Bogunovic, D. Anselmetti and J. Regtmeier, “Photolithographic
fabrication of arbitrarily shaped SU-8 microparticles without
sacrificial release layers”, Journal of Micromechanics and
Microengineering, 21, 2011, 027003 (5pp).
[11] F.J. Blanco, M. Agirregabiria, J. Garcia, J. Berganzo, M. Tijero,
M.T. Arroyo, J.M. Ruano, I. Aramburu and K. Mayora, “Novel
three-dimensional embedded SU-8 microchannels fabricated using
a low temperature full wafer adhesive bonding”, Journal of
Micromechanics and Microengineering, 14(7), 2004, 1047-1056.
[12] S. Tuomikoski and S. Franssila, “Free-standing SU-8 microfluidic
chips by adhesive bonding and release etching”, Sensors and
Actuators A, 120, 2005, 408-415.
[13] P. Vulto, N. Glade, L. Altomare, J. Bablet, L. Del Tin, G. Medoro,
I. Chartier, N. Manaresi, M. Tartagni and R. Guerrierri,
“Microfluidic channel fabrication in dry film resist for production
and prototyping of hybrid chips”, Lab on a Chip, 5, 2005, 158-162.
11-13
May 2011, Aix-en-Provence, France
277